Tag Archives: pool water

  • 0

Pool Water Maintenance: What You Need to Know

Tags : 

Owning a swimming pool during the summer months is awesome. At least, as long as it is clean and healthy. To make the pleasure last, you have to maintain it. In this guide, we will show you what you need to do regarding the maintenance of your swimming pool, its water, and the filtration system.

Through regular maintenance of your pool, you can prolong its life and the life of its equipment. And when we talk about maintenance, it is mostly the simple routine cleaning and maintenance done regularly that means the most for the swimming pool’s health.

It is advisable to clean the waterline of all impurities at least once a week. A tedious job, and sometimes long depending on the size of the pool, but effective in ensuring the cleanliness of the pool. To do this, you can use a specific product, an anti-lime product or a degreaser, and rub with a sponge.

It is recommended to use a vacuum cleaning broom or a swimming pool robot to clean the bottom of the pool, at least once a week.

You must regularly empty the baskets of the skimmers, otherwise known as surface skimmers, to avoid their clogging and clogging of the walls.

As a general rule, it is advisable to monitor the water level. The surface of the water should be two-thirds of the skimmer. Underneath, there is a risk of air intake and damage to the pump. Above, the cleaning of the water turns out to be imperfect.

Cleaning your pool also means maintaining the water. It must be clear, balanced, disinfected, and disinfectant.

You can very simply clean the surface of the water using a dip net to remove large debris. To be repeated at least once a week.

The quality of the water also depends on the use of chlorinated or anti-algae products. To do this, you have six options: chlorine, bromine, active oxygen, PHMB, ultraviolet, and salt electrolysis.

It is advisable to regularly analyze the , and more precisely the level of pH and disinfectant present in the water. Then you must correct the water accordingly, either by adding a cleaning product or by reducing its quantity.

Note: a pH below 7 can be harmful to the skin.

Maintenance of the Filtration System

The quality of the water depends on the filtration system. To check the filtration system, you will need to check the good simmering of the water at the outlet of the delivery nozzles: a sign of good water circulation in the filtration system.

Check the clogging of the filter. To clean a cartridge filter, simply remove the cartridge and rinse it with a water jet. To clean the other filters, backwash systems exist.

Regular Maintenance is a Prerequisite for Quality Swimming Pool Water

To have quality bathing water and not to resort to shock treatments, it is preferable to maintain your swimming pool regularly.

The pool water should be pure, clear, and the pH should be neutral; slightly basic water is however accepted – the ideal rate of 7.4. To avoid any imbalance of your water source of green water, cloudy water, and the appearance of water lines, the maintenance of swimming pool water is mandatory.

This maintenance concerns the use of a swimming pool disinfectant, the occasional application of products to maintain the pH level stable as well as the filtration of the water. Inflatable pools, tubular pools, above-ground pools, and in-ground pools are subject to regular and periodic maintenance: all pool water must be maintained and analyzed regularly using water control kits.

The analysis of swimming pool water measures the level of disinfectant, the pH, the stabilizer, and the alkalinity. As a reminder, water with a pH (potential of hydrogen) greater than 7 is said to be basic and acidic if it is less than 7.

Why You Should Always Clean Your Pool

It is imperative to clean your swimming pool for several reasons:

  • Benefit from clear water and preserve its quality from any external pollution;
  • Guard against any premature wear of coatings such as liner, concrete or tiles;
  • Maintain water that is always clean, healthy, and suitable for swimming.

Cleaning your pool after winter is also essential. Above ground pool, in-ground pool, wood, or plastic, all need cleaning.

A swimming pool enclosure, a winter cover, or a pool cover limits the cleaning of the pool, however, the pool and the liner are not immune to the appearance of a water line and suicidal insects!

Protecting your swimming pool from the elements is one thing, believing that this eliminates the need for cleaning with a high-pressure washer is a little too optimistic!

How to Clean Above-Ground and In-Ground Pool

You need different equipment to ensure periodic and daily cleaning of your swimming pool. Cleaning your pool naturally is recommended, and cleaning your pool with acid is strongly discouraged. Hydrochloric acid is not to be used in a swimming pool, even in skimmers!

Here is How to Clean an Above-ground or In-ground Pool in 5 Steps:

  • Clean the surface pool water of any external pollution using a dip net.
  • Suck up dirt from the bottom of the pool with a vacuum broom or with an automatic or semi-automatic pool robot, more practical because it is autonomous.
  • Use a water line brush, a kind of sponge to gently rub the waterline, formed by residues marking the limit of water on the liner (be careful not to damage it). The use of special coating/liner cleaning products makes the task easier. The walls and the bottom can also be cleaned with a brush.
  • Remove the residues present and pass a sponge on the skimmers, filters which are also to be cleaned. The skimmers clean the surface of the water by skimming them, the impurities sucked up are then sent to the pump which, after filtration, pushes the water back into the basin.
  • Wash cover, curtain, tarpaulin, pool enclosure, and coping; the use of a high-pressure cleaner facilitates the removal of dirt. The use of a low abrasive product is necessary to preserve the equipment.

must be regular to be effective. If you are not there or do not have the energy necessary to maintain your pool, contact a pool specialist near you. Most of them provide maintenance contracts. And when your pool tiles and wall get overgrown with lime deposits and calcium deposits, call the Calcium killers to help you get rid of those ugly white deposits on your pool tiles.


  • 0

Is Well Water Good for Your Pool and How to Manage It?

Tags : 

When you want to install a salt chlorinator in a pool with well water, we recommend that you empty it and fill it with water from the water supply grid.

What are the drawbacks of well water

The reason is that lime and other minerals often cause problems in the chlorinator electrode.

During electrolysis, lime and other elements precipitate and end up being embedded in the plates of the chlorinator cell.

The performance of the electrode decreases, because the plates are electrically isolated, due to the layer of lime, which acts as an insulator.
To clean the electrode plates, the electrode must be immersed in acid, which also attacks metal.

After many washes, the electrode ends up having serious corrosion problems.

In addition, there are other salts and metals present in well water that cause other problems, both due to the sediments they cause and due to the electrochemical effects that are produced.

Lime stains in the pool

If you have ever noticed, you will have seen that there is a white line on the walls, at the height of the surface. This is caused by lime deposits.

In pools with well water, these lime deposits form in a short time, and if they are not removed, the layer becomes thicker and difficult to clean.
Another problem is the roughness that is noticeable on the walls, when passing the hand the touch is rough.

Over time, this texture favors the accumulation of dirt and makes cleaning more difficult.

In addition, if you apply acid to dilute the lime, you are also diluting the cement in the joints, damaging the lining, until you have to empty the pool to repair it.

How to use well water for the pool

On many occasions, especially in pools installed in rural areas, there is no access to running water, so there is no choice but to use well water to fill the pool.

Well, I have a trick to remove lime from the pool with well water.

Well water treatment

This trick is not for everyone. It is not difficult to apply, but you have to be careful to follow the steps correctly.

If the pool is already affected by the remains of lime, you should lower the pH as much as possible, adding a lot of acid, or liquid pH-.

With a pH lower than 6, the lime will start to thin, but so will the cement joints.

It is VERY IMPORTANT that no one takes a bath during the process. The acidity of the water will be very aggressive for people.

After a few days in this state, empty the pool completely, clean the surfaces well with acid (better to use a specific liquid or pH reducer based on sulfuric acid, because hydrochloric acid or sulfonate emits a lot of vapors).
Finally, you will have to re-grout (apply Borada or seal with cement) all the joints.

As you can see, it is slow and hard work, and it is better to do it out of season, to avoid the effects of heat on the empty pool.

With the pool empty, the next step is filling (you probably already guessed that).

Start filling it by adding shock bleach.

The well water contains a lot of organic matter, is very “alive”, and then the plant matter, such as algae, begin to react to the light of the sun. Water can go bad in a matter of hours. Sometimes the same water is already green. Don’t worry about adding more chlorine than necessary, while no one takes a bath.

How to purify well water

Now comes the secret.

Add flocculant to the water. Yes, it’s that easy, but wait, this is just the beginning.

The flocculant causes all elements other than water to stick together, forming solid “flakes” (flocs) that settle to the bottom of the pool or remain stuck in the sand filter.

Be very careful not to overdo the dose of flocculant, because the sand can stick, and you will have to replace it.

calcium removal calcium killer

You will have to do sand washes every few hours so that the sediment is expelled.

These remains will include lime, algae, metals, and other elements.
The water will be practically pure. You will also have to help by sweeping the bottom so that the dirt does not stay there.

You can increase the effectiveness by adding a layer of diatomaceous earth, or diatomaceous sand over the filter sand, to retain a greater amount of debris.

Anyway, think that diatomite is difficult to find and somewhat expensive, so it is not necessary to use it unless you want to do a cleaning worthy of an operating room.

Most of it will go down the drain when doing a sand wash, so this is disposable.

The process time will depend on the type of water you are treating, so you will have to experiment and observe.

You can also repeat the process after a few days. However, it is better to do it before adding salt, in salt chlorination systems.

Prevent stains on the pool tile

I am not a fan of adding chemicals to the water, so once the pool is filled with purified water, I would try to avoid adding other products. For that, it is important that the chlorine level and the pH are perfect. There is nothing else to do.

When adding water, after washing, or simply to compensate for evaporation, we must bear in mind that we have also added lime, so we can repeat the process from time to time.

It should be done as a shock treatment. We do not recommend using maintenance flocculant, because it is still a chemical product which in large quantities is unhealthy, as you can see in this post.

If you’ve done enough washes to remove most of the lime, you’ll see that the water is crystal clear and the walls shiny.

Run your hand over the walls periodically, to make sure that the touch is smooth (but not slippery, which would be a sign of algae formation).
If you notice that they become rough, you should lower the pH a little and do another anti-limescale treatment.

Try to have these treatments done on the days that the pool is not used, to avoid exposure to bathers, especially with low pH.

Use of anti-scale products for swimming pools

There are products that keep lime in suspension, so they don’t really remove it, they just keep it from sticking to the walls.

This is an ineffective solution because it forces you to continually add chemical products, with the risks that they entail, and it also does not completely prevent lime from becoming embedded in the chlorinator electrodes.

The flocculant and sand wash trick works better, because you’re actually getting a lot of the lime out of the pool.

Other options to reduce pool limescale

In facilities with intensive use, such as spas and hotels, a tank can be installed to flocculate the water before adding it to the pool. In addition, filters or osmosis systems can be installed, which can purify the water, leaving it almost as if it were distilled.

These systems are not justified in domestic swimming pools, because with good flocculation the water quality is already very good.


Calcium Gone

Call us when you want the calcium gonecalcium removal calcium killer

Tap Here to Call and speak to the expert in calcium.

pool tile cleaning,cleaning pool tile,Pool tile cleaner,swimming pool tile cleaning,cleaning calcium on pool tile,cleaning swimming pool tile,swimming pool calcium tile cleaning,cleaning white stuff on pool tile,white stuff on my pool tiles,calcium pool tile cleaning,cleaning calcium on my swimming pool tile,white stuff on my pool tiles,how to clean off calcium on my pool,calcium cleaning

Quick Contact Form

    Your Name (required)

    Your Phone # (required)

    Your Email (required)

    Subject

    Your Message

    Enter In these letters / numberscaptcha
    In to this box to prove your real...

    Swimming Pool Tile Cleaning | Calcium Cleaning | Cleaning Pool Tile Services - Just One Call To The Pool Tile Cleaner Pro Get's The White Stuff GONE!

    Specialties Aquatic Tile Cleaning GPS Directions