fire damage pool clean up CA

How to Vacuum Clean Your Aboveground Pool Easily

Maintaining a clean is not as difficult as you think. With the right tools, you can learn and become better at cleaning your aboveground . Aboveground cleaning is easy if you stick to the routine for maintaining the pool.

When you do it properly, the water will stay fresh and there will be no harmful bacteria in it. Including vacuuming in the cleaning routine helps you eradicate foul smells and algae from your pool. It also keeps out debris from the pool.

Things to Have Before Vacuuming Your Pool

You would need a vacuum head and telescopic pole to vacuum your pool. Most of the vacuum heads you will find can fit with any telescopic pole. You also need a vacuum hose that will connect the vacuum head with the pool pump.

You must have a vacuum plate, also known as the skimmer plate. The vacuum plate links the hose directly with the skimmer inlet. With all your tools in place, you are ready to vacuum.

Steps to vacuum your aboveground pool

The first step to vacuuming your aboveground pool is to assemble the vacuum. Although it is easy to do this, you need to be careful about it. If you don’t do it properly, the vacuum will snap. Always ensure that the vacuum head properly connects to the telescopic pole.

Connect the hose to the vacuum head on one end and let the other end connect to the skimmer with the vacuum plate. Don’t forget to remove the skimmer basket before doing so.

Select the right setting for the filter valve. If the vacuuming is minor, set it to “Filter” under the Filter Setting. But if it is a major work and the debris in the pool is so much, set it to “Waste.”

When you use the waste setting, the vacuum pushes the water through the drain. It does not send it through the filter. The waste setting also reduces the volume of . So, ensure to refill the pool as you clean to sustain the water level.

Vacuum the pool in the same manner you would vacuum a rug. Vacuum in a slow and linear progression. If you go too fast, you would only end up stirring the dirt but will not suck it up.

As you vacuum, pause occasionally to remove the debris from the pump strainer. You would need to do this severally during the aboveground pool cleaning process.

When satisfied that you have properly vacuumed your pool, disassemble the vacuum head from the hoses. Clean out the skimmer and reset the Filter settings if you had changed it.

Finally, connect a brush to the telescoping pole. Scrub the floor of the pool thoroughly and your pool cleaning is over. Don’t forget to test the water after vacuuming to be of the water balance.

When to vacuum your pool

Vacuum your pool regularly. Doing it once a week is great. However, if you notice that the pool has a large quantity of debris, vacuum it immediately. You should vacuum your pool frequently during the swimming season when it is much in use.

The reason you need to do it frequently is to prevent the dirt from accumulating. Also, it will stop the algae from growing and let the chemical in the pool work effectively.

Why should you vacuum your pool?

Vacuuming is the most cost-effective way to keep your pool clean. However, it will take longer to clean and would require more energy. It requires physical exertion, as it is a manual task. If all that work is not for you, get an automatic pool cleaner or hire a pool cleaning professional to take care of your pool.

With vacuuming, you can use fewer chemicals in your pool. It is because vacuuming circulates chlorine in the pool and other additives too. Thus, it increases the efficiency of these chemicals.

Consider these when buying a vacuum

There are a lot of vacuums on the market. We also have manual vacuums, automatic vacuums, and robotic ones. When you are buying a pool vacuum, the size of your pool is a major factor to consider.

With a small pool, using a manual vacuum might not be much of a problem. However, when you have a bigger pool, you might need hands-off cleaning. This is where the automatic and robotic vacuum becomes vital.

Some pool owners would prefer having an automatic pool vacuum as the vacuum will do more of the work. It requires lesser effort and interaction to get the work done.

It is unlike the manual vacuum where you have to direct where you want the vacuum to clean. They are both safe and good for your pool. It is your choice to decide what works best for you.

The debris you will be cleaning will also determine the vacuum you should get. There are vacuums that work better with a large quantity of debris, while others work best with smaller amounts of debris.

Some pool vacuums use the pool pump for suction. Other pool vacuums use batteries to power their operation. Depending on what you prefer, there are always options for you to explore.

How to make vacuuming easier

If you will vacuum your pool, it only makes sense that you should also make the process easier for yourself. Try to reduce the amount of dirt and debris that finds its way into your pool.

Cover your pool when nobody is using it. When you want to remove the cover, blow away the debris on the cover before you lift it. The reason is so that none of the debris will mistakenly enter the pool. That way you make your next vacuuming easy breezy.


Leaving debris in your pool can cause algae to grow in it. A pool that has algae is not only unhealthy but also unpleasant. People don’t want to swim in green and slimy water. Vacuum your pool as often as you can. Otherwise, get aboveground pool cleaning experts in Arizona to clean and maintain the pool.