Pool Tile Cleaning | Pool Tile Cleaning | Calcium Removal

How to Avoid Common Causes of Pool Tile Damage

The thrill of owning a lasts only as long as its beauty is maintained, and the tile damage are a major factor when it comes to beauty. Therefore, as logic will have it, maintaining your pool tiles is crucial, not only because they add to the beauty of your pool, but because they play a vital role in preventing water damage to your pool’s structure.

If pool tiles are not properly cared for, they can quickly become damaged. Unsightly cracks, chips, and stains can lead to more significant problems if left unattended. But don’t fret – we’re here to help! In this article, we’ll uncover the most common causes of pool tile damage and provide practical tips to avoid them.

Common Causes of Pool Tile Damage

1. Water Chemistry Imbalance

Here are the most common water chemistry imbalances that can lead to Pool tile damage:

I. High or low pH levels

When the pH level in your pool water is either too high or too low, the water becomes acidic or alkaline, which can lead to damage to the surface of the pool tiles.

II. High alkalinity levels

If your pool water has high alkalinity, it can cause unsightly buildup on your pool tiles that make them appear cloudy or stained.

III. High calcium levels

When your pool water has too much calcium, it can cause tough deposits on your pool tiles, making it difficult to clean them properly.

How to Avoid These

I. Test the water regularly

You should check the chemical levels in your pool water at least once a week using a water testing kit. This will help you identify any imbalances early on and take corrective measures.

II. Maintain the right pH levels

Aim to keep your pool water’s pH levels between 7.2 and 7.8. If it’s too high, add a pH decreaser, and if it’s too low, add a pH increaser.

III. Keep alkalinity levels in check

Your pool water’s alkalinity levels should be between 80 and 120 parts per million (ppm). Use baking soda (1.5 lbs or 680 grams for 10 ppm) to increase the levels, or 25 ounces (710 grams) of muriatic acid to lower the alkalinity by 10 ppm. Note that these measurements are for a 10,000-gallon (37,900-liter) pool, and you should take precautions before you handle muriatic acid.

IV. Control calcium levels

Keep calcium levels under control using a calcium hardness increaser or a water softener if your water source is naturally hard.

2. Harsh Weather Conditions

Mother nature can be unpredictable and unforgiving, especially when it comes to anything left outdoors. Strong winds, hailstorms, heavy rain, and freezing temperatures; those are some of the weapons nature can throw at your pool tiles. Thankfully, you can soften the blows with a few precautions.

How to Avoid Pool Tile Damage

I. Cover your pool

Invest in a sturdy pool cover to protect your pool from debris and hail during extreme weather conditions.

II. Trim trees and branches

While trees can serve as windbreakers, they do lose branches during strong winds. These branches can collide with your pool tiles and break them.

III. Drain excess water

If heavy rain or flooding causes water levels to rise, drain the excess water to relieve pressure on the pool tiles.

IV. Winterize your pool

Prepare your pool for the winter months by draining the water and covering it with a winter pool cover to prevent damage from snow and ice.

3. Incorrect Cleaning Methods About Pool Tile Damage

Cleaning your pool tiles is essential to maintain their appearance and ensure their longevity. However, using incorrect cleaning methods can cause more harm than good. Here are some of the most common mistakes people make when cleaning their pool tiles:

  • Using abrasive tools
  • Using harsh cleaners
  • Using pressure washers
  • Ignoring stains

How to Rectify These

I. Use gentle tools

Use soft-bristled brushes, sponges, or cleaning cloths to clean your pool tiles gently. These tools will remove dirt and grime without damaging the tiles.

II. Use mild cleaners

Choose cleaning solutions that are specifically designed for pool tiles and have a pH that won’t damage the tiles or grout.

III. Be gentle with pressure washers

If you’re using a pressure washer, use the lowest pressure setting and keep the nozzle at a safe distance from the tiles to avoid damaging them.

IV. Address stains immediately

Address stains as soon as you notice them, as they can cause permanent damage if left untreated.

By following these guidelines, you can keep your pool tiles looking great and avoid costly repairs or replacements in the future.

4. Neglecting Regular Maintenance

Neglecting proper upkeep can lead to all sorts of problems, including stains, discoloration, and even cracks or chips. Let’s take a closer look at how neglecting regular maintenance can harm your pool tiles:

I. Algae and mold growth

Without regular cleaning and sanitizing, your pool tiles can become breeding grounds for algae and mold. Not only is this unsightly, but it can also make your pool tiles dangerously slippery.

II. Chemical imbalances

If you don’t maintain the proper chemical balance in your pool water, it can cause your pool tiles to lose their shine or even corrode over time.

III. Wear and tear

As with any other part of your pool, your tiles will experience wear and tear over time. Neglecting to address cracks or chips can lead to more significant damage down the line.

How to Avoid These

I. Regular cleaning

Make sure to clean your tiles regularly to keep dirt, grime, and debris at bay. Stick with gentle cleaning solutions and avoid using any harsh, abrasive tools.

II. Proper chemical balance

Keeping your pool water’s chemical balance in check is crucial. Test the water regularly and adjust the chemicals as needed to avoid damaging your pool tiles.

III. Don’t procrastinate on repairs

If you spot any damage to your pool tiles, it’s important to address it right away. Don’t wait until it’s too severe to ignore.

5. Installing Pool Accessories Improperly

Adding pool accessories is a great way to enhance your pool’s functionality and style, but improperly installing them can damage your pool tiles, causing things like:

  • Scratches, chips, and cracks
  • Corrosion
  • Misalignment

How to Avoid These

I. Hire a professional

It’s best to have a professional install your pool accessories to ensure they are properly installed and safe to use. One of the best you’ll find around Benicia, California is Specialty Aquatic Tile Cleaning.

II. Use compatible materials

Ensure that any pool accessories you install are made of the same material as your pool tiles or are compatible with them to avoid any corrosion.

III. Proper alignment

Ensure your pool accessories are aligned with your pool tiles to avoid shifting or damage. You’ll enjoy these benefits in the long run.

Professionals Should be Your Go-To Option

If you’ve noticed signs of damage or just want to give your pool tiles a thorough cleaning, it’s essential to seek the help of professionals. That’s where we at Specialty Aquatic Tile Cleaning come in. Our expert pool tile cleaning company specializes in restoring pool tiles to their original beauty and shine, no matter what ails them.

Don’t let damaged or ruin the beauty and enjoyment of your pool. Contact us today to schedule a pool tile cleaning and restoration service. Let us show you how we can help you protect your pool tiles and keep them looking their best for years to come.