Tag Archives: remove calcium deposits

  • 0
calcium removal calcium killer

How to Clean the Tough Heavy Calcium Deposits in Your Pool

Tags : 

Calcium deposits, or efflorescence, form when excess moisture inside cement rises to the surface. These white powder deposits are common in basement walls, floors, and other cement surfaces.

Although efflorescence is not harmful to cement, excessive amounts of it can cause fungal or insect problems. Once the calcium deposits harden, they are virtually impossible to remove without acid solutions.

Stronger acids are required for the heavier calcium deposits.

Instructions

  1. Dress appropriately for security purposes. Wear protective clothing, goggles, acid-resistant gloves, and a mask equipped with an acid-grade filter.
  2. Set a portable fan nearby and open the windows to provide adequate air circulation. Fill a spray bottle with acetic acid.
  3. Spray the acetic acid generously on the calcium deposits. Allow the acid to penetrate the cement for the recommended amount of time. Follow the manufacturer’s instructions on the product label.
  4. Scrub the cement with a hard bristle brush to dissolve the calcium deposits. Continue to apply acetic acid and scrub the cement until all calcium deposits are removed.
  5. Sprinkle baking soda generously over clean cement to neutralize the acid. While the acid neutralizes, fill a plastic bucket with water.6 Clean the affected surfaces promptly to restore the appearance of the cement and prevent future problems. To do this, cement thoroughly rinsed with water, using a coarse sponge. Allow the cement to air dry.

Tips and warnings

  • You can substitute hydrochloric acid for acetic acid. However, never use hydrochloric acid inside or mix it with any chemical.
  • Be very careful when using acetic acid; It is highly corrosive to the skin.

Cleaning with vinegar

Baking soda, borax, dish soap, toothpaste, and vinegar can be used in much the same way to clean calcium deposits, so you can use most of the information related to the vinegar and apply it also to cleaning agents.

What you need for cleaning with vinegar:

  • A cleaning brush. With soft bristles, not metallic.
  • A bottle of spray.
  • Vinegar, a 5% solution.

Once you have these items, you can start cleaning.

  1. The first step is to stop all use of the pool until a water test can be performed. If the test reveals that the levels are within range, you can use a stain remover to remove deposits from the waterline. If the pH, alkalinity or calcium levels are too high, they should be reduced before using a scale and scale cleaner.
  2. It is recommended to start first by lowering the hardness of the water. The hardness can only be lowered by partially draining and then filling the pool. Your pool needs a hardness level of 200 ppm to 400 ppm. A level of hardness above 400 ppm can lead to scale formation on the surface of the pool and equipment and can also cause cloudy water.
  3. Once the pool has drained, and filled again, check that the hardness is within range. If it is not, you must repeat step 2 until you normalize the hardness. Only in that case can you adjust the alkalinity. You should retest before doing so because the alkalinity should be lower than before. To reduce alkalinity, you can use dry acid or muriatic acid. The necessary amount of any of the chemical products will vary according to the size and volume of the pool and the reading of alkalinity.
  4. Once the alkalinity is within the range, the pH can be adjusted. For this, a negative pH is used, in case of a high pH. Once the pH is balanced, we can move on to the final step.
  5. The final step will be to use the vinegar. Before adding the product, (following the package instructions), make sure you have a pool brush handy to brush the walls as needed. There are no special tricks. You can put the vinegar in the bottle and spray the solution on the calcium deposits or simply pour it from your own bottle, then use the brush to scrub.

These types of cleaners tend to work quite well if you detect and solve the problem from the beginning, and of course, you should use them fairly regularly to avoid accumulation.

If you do all these steps, and still have lime deposits that are difficult to remove, try the following.

Cleaning with muriatic acid

With the vinegar and the other mild cleansers that we have already mentioned, you can enter the pool while you are cleaning. With muriatic acid, however, this is not recommended.

Muriatic acid is more powerful and more dangerous when handling. You can find this chemical in a home improvement store or pool supply store.

What you need for cleaning with muriatic acid:

  • Muriatic acid container.
  • Safety glasses.
  • Rubber gloves.
  • Respirator.
  • Plastic cube.
  • Measuring cup of plastic.
  • Plastic spoon
  • Plastic spray bottle.
  • Marker.
  • Non-abrasive scourer

This list of materials is enough for you to realize that this goes beyond the maintenance of the pool for beginners. We want to remind you that muriatic acid is dangerous.

  1. Put on goggles, gloves, and the respirator. Then head outside with all your ingredients to start mixing. Absolutely do not attempt to mix in a closed area.
  2. Fill your bucket with four liters of water. Pour 230 grams of muriatic acid with the measuring cup slowly into the water. Always pour the acid in the water instead of the other way round, as the acid is more likely to splash. Another thing to keep in mind is that you should pour slowly since this mixture produces heat.
  3. With the plastic spoon, mix the water and the acid. Again, do it slowly, because you do not want it to boil.
  4. Carefully fill the plastic bottle with a mixture of water and acid.
  5. Use the marker to label the measuring cup, spoon and spray bottle with “Muriatic acid”. Do not try to use the chemical for anything else. If you are worried that this may happen, leave the bottle aside for proper disposal.
  6. You should always stay out of the pool, use the spray bottle to spray the waterline of the pool and rub with the non-abrasive scouring pad.

Get in touch with your local pool supply company or with the municipality to learn how to get rid of any unused muriatic acid. Do not simply discard it or pour it down the drain.

Because muriatic acid is much stronger than vinegar or other cleaning products mentioned above, you can eliminate calcium deposits that are much more advanced. That said, with deposits that have been growing and hardening for a long time, sometimes even muriatic acid is not enough.

If that is your situation, you have a remaining option. Pressure washing.


  • 0

How to Clean Your Pool and 100% Remove Calcium Deposits

Tags : 

This must be one of the many questions on the mind of a pool owner. And here I will be giving 5 ways on how to remove calcium deposits from your pool! And not only will it look better, it will allow you to enjoy your pool like you once did!

1. Use a calcium releaser

These products makes it easy to remove calcium deposits. While selecting your product, select acid free calcium releasers, as these products are left a long time on your pool tile before scrubbing off, and the acid could destroy your pool finish.

2. Use scaling treatment

If your pool is made of fiber glass, scaling treatment is advised because other methods would scratch the glass since they involve brushing.

3. Use a pumice

This rock is also effective in removing calcium deposits in pools, make sure the surface of both the rock and the pool is wet, and do not scrub too hard in order not to deface your pool.

4. Use white vinegar and a scrub brush

Fill a water bottle spray with half water and half vinegar solution, spray on your pool tile and leave for some minutes before rubbing gently with a scrub brush.

5. Use muriatic acid

This is also known as Hydrochloric acid, this acid has high strength in removing mineral deposits, calcium deposits inclusive. While using it, you should be fully clothed with your google and gloves in order to avoid safety hazards. Make sure not to leave the acid too long because you do not want to destroy the finish of your pool.

6. Hire a professional pool cleaner to help

There are several reasons why you should hire a professional to take care of your pool.

The first and most important reason is to maintain the chemical integrity of your pool water.

Chemically treating a swimming pool can be very frustrating for pool owners, at least if you want to maintain a level of quality!

In fact, this is a big reason why people prefer a professional review of their pool, as it can be confusing for someone who doesn’t know what they are doing.

Most importantly, your swimming pool is a breeding ground for nasty little organisms. Proper chemical treatment can effectively treat water and ensure the health and well-being of your family.

The next big reason for hiring a pool maintenance professional is to properly maintain the pool equipment. Most owners are not good at mechanically and are a little intimidated by the pool equipment.

In addition, there are a large number of moving parts and if anything moved, it could drastically affect the normal operation of your pool and its filtration process.

A pool maintenance professional will not only keep your pool running smoothly, but will also use preventative maintenance techniques to save you time and money.

The last and most important reason to hire professionals is to enjoy your pool! 

Pick up the phone and call 626-275-8959 and get your free estimate! Proudly taking care of Covina CA and all of its pool owners! Feel free to also give us a call with any other questions or concerns regarding your pool!

Bottomline

Calcium deposits in pools can have side effects on people who use the pool, these effects can range from eye irritation to whole body irritation, they are also irritating to look at and would reduce the interest of people in your pool.

When removing these deposits, make sure you are dressed properly to avoid safety hazards and also try as much as possible not to destroy the finish of your pool.



Calcium Gone

Call us when you want the calcium gonecalcium removal calcium killer

Tap Here to Call and speak to the expert in calcium.

pool tile cleaning,cleaning pool tile,Pool tile cleaner,swimming pool tile cleaning,cleaning calcium on pool tile,cleaning swimming pool tile,swimming pool calcium tile cleaning,cleaning white stuff on pool tile,white stuff on my pool tiles,calcium pool tile cleaning,cleaning calcium on my swimming pool tile,white stuff on my pool tiles,how to clean off calcium on my pool,calcium cleaning

Quick Contact Form

    Your Name (required)

    Your Phone # (required)

    Your Email (required)

    Subject

    Your Message

    Enter In these letters / numberscaptcha
    In to this box to prove your real...

    Swimming Pool Tile Cleaning | Calcium Cleaning | Cleaning Pool Tile Services - Just One Call To The Pool Tile Cleaner Pro Get's The White Stuff GONE!

    Specialties Aquatic Tile Cleaning GPS Directions