Tag Archives: swimming pool

  • 0

Why and How to Remove Limescale From Pool Heater and Swimming Pool

Tags : 

Calcium deposits are formed on surfaces that touch hard water. Even though these deposits occur naturally, they can cost you a lot of money if you do not eliminate them. Calcium deposits can cause a water heater to increase fuel use by 40 percent or more. It is beneficial to observe these deposits and withdrawals when possible.

Bird's Eye View of a House with Swimming Pool

Measure the amount of lime in water

Measuring the level of lime in the water in your is in fact the same as measuring the hardness of the water, always given in TH (hydrometric strength). Very easily carried out thanks to bands with colorimetric indicators, this test will make it possible to determine the concentration of calcium and magnesium carbonate (and therefore of limestone) in the water in our basin.

Generally speaking, it is estimated that the ideal TH for water should be between 10 ° f and 20 ° f. Beyond 20 ° f, the east is said to be hard. And above 25 ° f, it is considered that its lime concentration is too high: it must therefore be treated with an anti-lime product.

Why is having lime in your swimming pool a problem?

If pool owners hunt limestone like this, it’s not for nothing. Having excess lime in your swimming pool can indeed be the cause of various problems.

First of all, at the level of the interior of the basin. Because the more our pool is loaded with limestone, the more “chance” we have of seeing it build up from the inside. 

And this as well at the level of the waterline as at the level of the walls and the bottom (especially if one has opted for a swimming pool liner as a coating). And a scaled pool is a pool whose water will be cloudy, and whose walls will be covered with gray or whitish deposits.

Stains which, in addition to being unsightly, will promote the appearance of ‘impurities and algae development. Without forgetting the possible inconvenience for swimmers: possible irritation of the skin and eyes.

But that’s not all: having too much lime can also be dangerous for the filtration system of the swimming pool. Indeed, when there is too much lime in our water, it will simply build up scale and prevent the proper functioning of the swimming pool filter.

Instructions to remove large calcium deposits from water heater

  1. Drain all water from the water heater tank.
  2. Remove the drain valve. With a wrench, unscrew the valve.
  3. Insert a long, narrow brush through space from which you have removed the drain valve. Rub each inside surface of the bottom of the tank with the brush.
  4. Reinstall the drain valve. Apply Teflon tape on the outside of the valve to prevent leaks.
  5. Open the drain valve and attach a garden hose to it.
  6. Open the water supply through the hose and in the water heater. Leave on for 15 to 20 seconds and then turn it off.
  7. Let all the water drain out of the tank.
  8. Repeat this filling and draining process until the water draining from the stove is clear.

How to prevent limescale in the swimming pool

If you live in an area where the water is hard (TH greater than 20), the limestone will represent a real danger for our pool and our equipment. To avoid having to change our liner or completely empty our pool to scrub the limestone from the walls, it is better to act upstream.

To do this, we can:

  • Buy a lime stabilizer from a pool equipment store to prevent in the pool.
  • Check that the pool water is not too hot, as a high temperature favors the formation of scale.
  • Carry out at least 3 anti-limescale treatments per year. The first to commissioning the pool, the next in mid-season, and finally the last before putting the pool in winter. Obviously, if our pool shows signs of scaling outside of these 3 periods, we apply an anti-limescale treatment and we rub the walls well.

  • 0

The Complete Swimming Pool Maintenance Guide

Tags : 

Owning a swimming pool during the summer months is awesome. At least, as long as it is clean and healthy. To make the pleasure last, you have to maintain it. In this guide, we will show you what you need to do regarding the maintenance of your swimming pool, its water, and the filtration system.

Pool maintenance

Through regular maintenance of your pool, you can prolong its life and the life of its equipment. And when we talk about maintenance, it is mostly the simple routine cleaning and maintenance done regularly that means the most for the swimming pool’s health.

It is advisable to clean the waterline of all impurities at least once a week. A tedious job, and sometimes long depending on the size of the pool, but effective in ensuring the cleanliness of the pool. To do this, you can use a specific product, an anti-lime product or a degreaser, and rub with a sponge.

It is recommended to use a vacuum cleaning broom or a swimming pool robot to clean the bottom of the pool, at least once a week.

You must regularly empty the baskets of the skimmers, otherwise known as surface skimmers, to avoid their clogging and clogging of the walls.

As a general rule, it is advisable to monitor the water level. The surface of the water should be two-thirds of the skimmer. Underneath, there is a risk of air intake and damage to the pump. Above, the cleaning of the water turns out to be imperfect.

Water Maintenance

Cleaning your pool also means maintaining the water. It must be clear, balanced, disinfected, and disinfectant.

You can very simply clean the surface of the water using a dip net to remove large debris. To be repeated at least once a week.

The quality of the water also depends on the use of chlorinated or anti-algae products. To do this, you have six options: chlorine, bromine, active oxygen, PHMB, ultraviolet, and salt electrolysis.

It is advisable to regularly analyze the pool water, and more precisely the level of pH and disinfectant present in the water. Then you must correct the water accordingly, either by adding a cleaning product or by reducing its quantity.

Note: a pH below 7 can be harmful to the skin.

Maintenance of the Filtration System

The quality of the water depends on the filtration system. To check the filtration system, you will need to check the good simmering of the water at the outlet of the delivery nozzles: a sign of good water circulation in the filtration system.

Check the clogging of the filter. To clean a cartridge filter, simply remove the cartridge and rinse it with a water jet. To clean the other filters, backwash systems exist.

Regular Maintenance is a Prerequisite for Quality Swimming Pool Water

To have quality bathing water and not to resort to shock treatments, it is preferable to maintain your swimming pool regularly.

The pool water should be pure, clear, and the pH should be neutral; slightly basic water is however accepted – the ideal rate of 7.4. To avoid any imbalance of your water source of green water, cloudy water, and the appearance of water lines, the maintenance of swimming pool water is mandatory.

This maintenance concerns the use of a swimming pool disinfectant, the occasional application of products to maintain the pH level stable as well as the filtration of the water. Inflatable pools, tubular pools, above-ground pools, and in-ground pools are subject to regular and periodic maintenance: all pool water must be maintained and analyzed regularly using water control kits.

The analysis of swimming pool water measures the level of disinfectant, the pH, the stabilizer, and the alkalinity. As a reminder, water with a pH (potential of hydrogen) greater than 7 is said to be basic and acidic if it is less than 7.

The Risks and Consequences of an Unmaintained Swimming Pool

It is imperative to clean your swimming pool for several reasons:

  • Benefit from clear water and preserve its quality from any external pollution;
  • Guard against any premature wear of coatings such as liner, concrete or tiles;
  • Maintain water that is always clean, healthy, and suitable for swimming.

Cleaning your pool after winter is also essential. Above ground pool, in-ground pool, wood, or plastic, all need cleaning.

A swimming pool enclosure, a winter cover, or a pool cover limits the cleaning of the pool, however, the pool and the liner are not immune to the appearance of a water line and suicidal insects!

Protecting your swimming pool from the elements is one thing, believing that this eliminates the need for cleaning with a high-pressure washer is a little too optimistic!

The 5 Steps for Cleaning an Above-ground or in-ground Swimming Pool

You need different equipment to ensure periodic and daily cleaning of your swimming pool. Cleaning your pool naturally is recommended, and cleaning your pool with acid is strongly discouraged. Hydrochloric acid is not to be used in a swimming pool, even in skimmers!

Here is How to Clean an Above-ground or In-ground Pool in 5 Steps:

  • Clean the surface pool water of any external pollution using a dip net.
  • Suck up dirt from the bottom of the pool with a vacuum broom or with an automatic or semi-automatic pool robot, more practical because it is autonomous.
  • Use a water line brush, a kind of sponge to gently rub the waterline, formed by residues marking the limit of water on the liner (be careful not to damage it). The use of special coating/liner cleaning products makes the task easier. The walls and the bottom can also be cleaned with a brush.
  • Remove the residues present and pass a sponge on the skimmers, filters which are also to be cleaned. The skimmers clean the surface of the water by skimming them, the impurities sucked up are then sent to the pump which, after filtration, pushes the water back into the basin.
  • Wash cover, curtain, tarpaulin, pool enclosure, and coping; the use of a high-pressure cleaner facilitates the removal of dirt. The use of a low abrasive product is necessary to preserve the equipment.

Pool maintenance must be regular to be effective. If you are not there or do not have the energy necessary to maintain your pool, contact a pool specialist near you. Most of them provide maintenance contracts. And when your pool tiles and wall get overgrown with lime deposits and calcium deposits, call the Calcium killers to help you get rid of those ugly white deposits on your pool tiles.


Calcium Gone

Call us when you want the calcium gonecalcium removal calcium killer

Tap Here to Call and speak to the expert in calcium.

pool tile cleaning,cleaning pool tile,Pool tile cleaner,swimming pool tile cleaning,cleaning calcium on pool tile,cleaning swimming pool tile,swimming pool calcium tile cleaning,cleaning white stuff on pool tile,white stuff on my pool tiles,calcium pool tile cleaning,cleaning calcium on my swimming pool tile,white stuff on my pool tiles,how to clean off calcium on my pool,calcium cleaning

Quick Contact Form

    Your Name (required)

    Your Phone # (required)

    Your Email (required)

    Subject

    Your Message

    Enter In these letters / numberscaptcha
    In to this box to prove your real...

    Swimming Pool Tile Cleaning | Calcium Cleaning | Cleaning Pool Tile Services - Just One Call To The Pool Tile Cleaner Pro Get's The White Stuff GONE!

    Specialties Aquatic Tile Cleaning GPS Directions