Tag Archives: scales

  • 0

How to Remove Large Calcium Deposits in a Water Heater

Tags : 

How to Remove Large Calcium Deposits in a Water Heater

Calcium deposits are formed on surfaces that touch hard water. Even though these deposits occur naturally, they can cost you a lot of money if you do not eliminate them. Calcium deposits can cause a water heater to increase fuel use by 40 percent or more. It is beneficial to observe these deposits and withdrawals, when possible.

Bird's Eye View of a House with Swimming Pool

Instructions to remove large calcium deposits from water heater

  1. Drain all water from the water heater tank.
  2. Remove the drain valve. With a wrench, unscrew the valve.
  3. Insert a long, narrow brush through the space from which you have removed the drain valve. Rub each inside surface of the bottom of the tank with the brush.
  4. Reinstall the drain valve. Apply Teflon tape on the outside of the valve to prevent leaks.
  5. Open the drain valve and attach a garden hose to it.
  6. Open the water supply through the hose and in the water heater. Leave on for 15 to 20 seconds and then turn it off.
  7. Let all the water drain out of the tank.
  8. Repeat this filling and draining process until the water draining from the stove is clear.

  • 0

How to Remove Heavy Concrete Calcium Deposits

Tags : 

How to Remove Heavy Concrete Calcium Deposits

Calcium deposits, or efflorescence, form when excess moisture inside cement rises to the surface. These white powder deposits are common in basement walls, floors, and other cement surfaces.

Although efflorescence is not harmful to cement, excessive amounts of it can cause fungal or insect problems. Once the calcium deposits harden, they are virtually impossible to remove without acid solutions.

Stronger acids are required for the heavier calcium deposits.

Instructions

  1. Dress appropriately for security purposes. Wear protective clothing, goggles, acid-resistant gloves, and a mask equipped with an acid-grade filter.
  2. Set a portable fan nearby and open the windows to provide adequate air circulation. Fill a spray bottle with acetic acid.
  3. Spray the acetic acid generously on the calcium deposits. Allow the acid to penetrate the cement for the recommended amount of time. Follow the manufacturer’s instructions on the product label.
  4. Scrub the cement with a hard bristle brush to dissolve the calcium deposits. Continue to apply acetic acid and scrub the cement until all calcium deposits are removed.
  5. Sprinkle baking soda generously over clean cement to neutralize the acid. While the acid neutralizes, fill a plastic bucket with water.6 Clean the affected surfaces promptly to restore the appearance of the cement and prevent future problems. To do this, cement thoroughly rinsed with water, using a coarse sponge. Allow the cement to air dry.

Tips and warnings

  • You can substitute hydrochloric acid for acetic acid. However, never use hydrochloric acid inside or mix it with any chemical.
  • Be very careful when using acetic acid; It is highly corrosive to the skin.

  • 0
Calcium Cleaning Specialties Aquatic Tile Cleaning

Calcium Deposits, Lime Stains, Scales: How to Remove Them

Tags : 

Lime stains, sometimes called scale, occur around the upper edge of the pool and resemble deposits of white or gray crusts. They are often caused by hard water or minerals that seep from nearby mortar glue. 

If left in place, they can lead to permanent stains on the tile, as well as causing the pool to look dirty and unattractive. Removal of calcium deposits from tiles in the pool will require some physical work.

Natural stone and glass tile combo

Unfortunately, you will have to repeat the process periodically, as the spots often return.

Instructions

  1. Drain the water from the pool at least 6 to 10 inches so you can easily access areas stained with calcium. This also allows you to clean the loosened calcium off without depositing it in the pool water.
  2. Kneel on the edge of the pool, or enter the pool if you do not mind getting wet. Place a stiff brush bristle tiles on top of the calcium deposits and scrub the tiles of the pool using circular motions to loosen the deposits.
  3. Clean the tile of the pool with a cloth or a paper towel to remove the loosened calcium. Examine the area to see if all the deposit came off, and use a pumice stone to scrub gently with circular motions or no calcium is maintained.
  4. Remove the thickness scale from the tile with a razor blade, taking care to keep a low angle and avoid scratching the surface.
  5. Clean the area again with the cloth. Repeat the process to clean around the perimeter of the pool to remove the remaining calcium deposits.

Tips and warnings

  • You can use a standard pumice stone available at beauty stores or buy one at a pool store that has a longer handle made specifically for pools.
  • Commercial products are also available to remove tile incrustations from the pool.

Calcium Gone

Call us when you want the calcium gonecalcium removal calcium killer

Tap Here to Call and speak to the expert in calcium.

pool tile cleaning,cleaning pool tile,Pool tile cleaner,swimming pool tile cleaning,cleaning calcium on pool tile,cleaning swimming pool tile,swimming pool calcium tile cleaning,cleaning white stuff on pool tile,white stuff on my pool tiles,calcium pool tile cleaning,cleaning calcium on my swimming pool tile,white stuff on my pool tiles,how to clean off calcium on my pool,calcium cleaning

Quick Contact Form

Your Name (required)

Your Phone # (required)

Your Email (required)

Subject

Your Message

Enter In these letters / numberscaptcha
In to this box to prove your real...

Calcium Gone! Just Call us and kiss your calcium all gone

Specialties Aquatic Tile Cleaning GPS Directions