Monthly Archives: July 2020

  • 0

7 Tips for Easy and Quick Pool Cleaning

You often do the same when it comes to cleaning your pool. In doing so, you limit cleaning your pool to a series of standard tasks.

While this does not pose any problem in the short term, we nevertheless recommend that you regularly perform the following tasks when cleaning your pool.

1. Clean the edge of the pool

Cleaning the edge of the pool is a tedious task that is often postponed. However, we recommend that you regularly clean the edge of your pool.

You will thus eliminate the lime at the height of the water line. If you put off this task over and over, you will have a hard time removing the scale deposit.

Therefore, take the time to meticulously clean the edge of your pool on a regular basis. You will thus obtain an impeccable water line, without the slightest trace of lime on the interior coating.

2. Add a flocculant

When using the same water for a long time, some concentrations may increase. Too high concentrations of calcium, iron, copper, etc. can cause problems and even cause the appearance of brown spots in the pool. To avoid this inconvenience, a flocculant should be used.

This product precipitates all the impurities and makes them fall to the bottom of the swimming pool. All you have to do is vacuum to remove them from the pool. All you have to do is place the flocculant sachets in the skimmers. Through filtration, the product spreads into the water and takes effect.

This product also makes it possible to obtain perfectly clear water. It is therefore in your best interest to follow this advice.

3. Vacuum the pool

Small impurities precipitated by means of the flocculant must then be removed with a swimming pool vacuum cleaner. There are dozens of models.

Manual vacuum cleaners are relatively inexpensive, although there are also different price categories here. Our general finding is that a more expensive vacuum cleaner, like the Fairlocks, provides more efficient and significantly faster cleaning than a cheaper model.

But cleaning a swimming pool with a manual vacuum cleaner is very laborious and time consuming. The ideal alternative is the robotic pool cleaner. In this case, the vacuum does all the work for you.

The purchase price is higher than that of a manual vacuum cleaner. But one thing is certain: a robot makes your job much easier and limits the number of products you need to maintain your pool.

4. Remove the leaves

The leaves have a bad influence on the quality of the water since they absorb a lot of chlorine. It is therefore essential to remove them using a landing net.

Don’t forget to empty the skimmer baskets regularly. These are indeed often filled with leaves.

5. Clean the roller shutter

Many impurities clump together on the surface of the roller shutter and inside it. To remove these impurities and preserve the appearance of your roller shutter, you should take the time to clean the shutter completely.

An effective product is Roldeck descaling agent. With the help of a good sponge, you can clean the roller shutter in the blink of an eye. It is not recommended to bathe directly after cleaning. It is better to wait until the product is fully assimilated. So wait a short day before going into the water.

6. Perform a backwash

The backwash (or backwash) of the swimming pool filter is an essential task. Without backwash, your filter can indeed become clogged. Under the most extreme conditions, it could even explode.

To avoid this inconvenience, the solution could not be simpler: perform a backwash once a week in order to permanently remove the impurities from the filter. This will prevent an increase in pressure inside the filter.

7. Add fresh water regularly

Our last tip should only apply a few times a year. Adding new water to the pool reduces certain concentrations of salts and metals, such as chlorides, iron, copper, etc.

These concentrations must be reduced in order to guarantee good disinfection of the swimming pool water. In addition, high concentrations of metals can cause brown spots to appear in the pool.

To avoid this inconvenience, add 3 to 5% of the total water volume in your pool at least 3 times a year. Warning: do not use well water in particular. This indeed contains too high concentrations of these metals. You could therefore make the situation worse.

Do you have more questions about cleaning your pool? Please do not hesitate to contact us.


  • 0

How to Clean the Joints of Your Swimming Pool Tiles

Tags : 

Pool tiles are very easy to clean. Because the dirt is usually the same ones found in damp rooms such as kitchen, bathroom, shower and swimming pool.

On the other hand, cleaning the joints is another story! Under the action of humidity and corrosive water treatment products (chlorine, salt, bromine), the joints become dirty, blacken and stain with mold.

Here are some practical tips for cleaning the joints of swimming pool tiles.

Natural stone and glass tile combo

Maintenance of the joints of a tiled swimming pool

Bacteria, germs and microorganisms proliferate on fouled joints, which is not optimal for bathing in clean, healthy water. The pool robot is certainly very effective: it sucks up dirt, leaves, detritus, hair … but it does not remove scale which becomes encrusted at the joints.

There are different natural and ecological products to clean the joints of a tiled swimming pool.

  • Baking soda to whiten joints

Mix a tablespoon of baking soda in a glass of warm water with a few drops of dish soap. Spray and leave to act for ten minutes. Rinse with clear water and allow to dry.

  • White alcohol vinegar to remove lime

Pour white vinegar into a container and add a little washing-up liquid. Rub the joints with a toothbrush, leave to act, and rinse with clear water. You can also mix a glass of alcohol vinegar with two spoonfuls of baking soda. Same process: rub, leave on, and rinse with water.

Lemon and black soap are also natural and effective products to remove lime that lodges in the joints of the tiles.

Cleaning a swimming pool tile with a magic sponge

The magic sponge , also called magic eraser, makes it possible to clean the water line, the tile joints of the swimming pool , the deposits of tartar … To use it is easy: just moisten the sponge then rub the interstices of the tiles. It is an economical and quick solution for cleaning your tiled pool. The price of a magic sponge is around 2 euros, and they are generally sold in batches at attractive prices.

On the other hand, if the joints of a tiling are too damaged, they must be redone . It is advisable to call on a competent pool specialist or a tiler who has the necessary know-how to work on a swimming pool. Indeed, the good quality of the joints of a swimming pool is essential. The seals ensure perfect sealing and good insulation of the pool. Be careful, because leaky seals can sometimes cause water infiltration at the level of the basin.

Some precautions to take when cleaning the joints of a swimming pool tile

Bleach is not recommended because it is too corrosive. In addition, its use is dangerous during its handling. This product should not be mixed with other products as the fumes can be harmful and toxic.

The jet cleaner is to be used with caution: its jet is powerful and poorly controlled, this accessory can take off the seals without cleaning them.

Get more guidance from a professional pool cleaner near you.


  • 0

How to Remove Lime Deposits From Your Pool

Tags : 

When it comes to your body, calcium is a very good thing, but when it comes to your pool, it is not. When calcium forms on your pool, an effect known as limescale, your pool can look unsightly and even be in danger.

If lime develops in your pool, you should hire pool maintenance professionals to inspect and clean up debris from its surfaces. Most pool cleaning services make a diagnosis for the localization as well as the elimination of limescale.

If you want to do it yourself, read the rest of the article.

So how do you know if your pool contains limestone?

Look for white or light gray spots on the sides and bottom of the pool, as well as the edges of the pool deck. Limestone forms scaly spots or streaks when the pH of the pool water and the calcium levels in the water are out of balance.

Although this build-up of lime can be removed, it can be difficult to do so. This article provides homeowners with tips that any pool maintenance company wouldn’t want you to know to remove lime deposits from the pool walls and prevent their return.

Types of Calcium that Leave Deposits

There are 2 common types of calcium that form lime in a pool: calcium carbonate and calcium silicate . It is important to understand which type harms the walls of your pool .

The calcium carbonate is white, scaly and easily detached. Calcium silicate is slightly gray and more solid, which makes it more difficult to remove.

If the walls of your pool contain calcium silicate, the scale on the walls of your pool is a symptom of a more serious problem: calcium scale in the plumbing and filtration system. This is a problem that only a professional pool maintenance company can deal with.

If you don’t know what type you have on your pool , use a dropper to pour muriatic acid on the deposits. Calcium carbonate will foam in reaction to acids. Calcium silicate, being a more solid substance with a robust construction, will remain unchanged.

Removing Calcium Carbonate

If your pool contains calcium carbonate, removing it is easy, but takes time.

You can use a rough but harmless object for tiles such as a wet pumice stone or an eraser to flake off deposits.

You can also get calcium descaling treatment solutions from a pool service company or a pool supply store. Follow the product instructions to avoid damaging the pool water or injuring yourself.

Removal of Calcium Silicate

Calcium silicate is incredibly difficult to remove on your own. You can try using a pumice stone, but it will take a ton of elbow grease and time to complete the process successfully.

If you have a vinyl or fiberglass pool , this will not work at all. Even some descaling treatments can take months to break down the lasting calcium silicate.

You will likely need to hire pool maintenance professionals to remove lime build-up if you cannot do it yourself. They can also adjust the quality of your pool water, including pH and calcium levels, to prevent future buildup.

Remove limestone with a blowtorch and a polishing machine

If you have emptied your pool to clean it and you notice traces of lime, there are two methods that can get rid of this debris. These methods are effective but can take a long time depending on the size of your pool.

To remove the lime that is in the walls of your pool, just use a blowtorch to make the tartar less robust and then rub it with a wire brush. With the effect of heat, the tartar will be easily removed.

If you have limestone at the bottom of the pool, simply clean the pool thoroughly with a vacuum cleaner, then sand it with a sanding and polishing machine.

Once descaling and polishing are finished, rinse your pool with a karcher to remove debris. Then evacuate your pool, let it dry, and fill it again if you want to reuse it.

If you do not want to fill it immediately, choose a tarpaulin or a protective cover. Your pool will therefore remain intact and ready to be filled at any time you wish.

Good to know

The disadvantage of chlorine is that it makes no difference between organic impurities and the human body. The consequences after a long stay in the water are red eyes, caused by chlorine. This is the reason why most people wear swimming goggles.

Here’s a video that summarizes all we’ve said:


  • 0

Lime Deposits: How Chlorine Helps You in Regular Pool Treatment

Tags : 

Clean, healthy pool water should be the ultimate goal for any pool owner. The most common solution to achieve this is a regular treatment of the pool water to remove lime and debris.

Ceramic tile with a heavy build up

However, the wrong dosage of cleaning products can lead to the accumulation of several layers of limestone on the walls and in the pool’s bottom. To remove this debris, you need to understand everything that can make them appear.

The Importance of Chlorine for the Pool

Chlorine is the first choice for maintaining healthy pool water. Chlorine has been used for years in swimming pools around the world.

It is a highly reactive chemical that reacts with all kinds of biological impurities in water.

If these organic impurities are not treated with care, bacteria can develop algae or even a bio-film.

What Happens if a Swimming Pool is not Well-balanced?

If the pool water has a high calcium hardness or other debris, this can cause technical problems. Like fouling or lime in the pipes and in the pool itself.

As a result, the maintenance and cleaning of the pool will increase. If the supply water is very hard, large amounts of lime can deposit on the sides of the pool.

Even if there is only a little calcium carbonate in the water, and following an unbalanced addition of chlorine and PH, lime will form at the level of the evaporation line of the water as well as on the pool walls. These lime deposits at the edge of the pool are often difficult to remove and involve manual work.

Water Filtration Rings: Less Effort, Less Cost

Compared to the maintenance consequences described above, the solutions seem incredibly simple.

The main configuration of a swimming pool is always the same. There is a filter system, a pump, and maybe a heating element, that’s all.

In accordance with the size of the pool, you must install a ring at the freshwater supply line and another ring in the circulation line. In the case of a large public swimming pool, install in the circulation line of each swimming pool, to get the same results in all swimming pools.

What’s the result?

In case of calcium hardness, the ring keeps the dissolved calcium in the pool water, which will have a more fluid texture. Over time, the pool water will be much softer, despite the calcium.

Less crust will form on the evaporation line. And limestone debris will be much easier to remove. When you use these filters and rings, you are also fighting the growth of algae in the pool.

Many owners have stopped using chemicals since the installation of these rings.

No chlorine or other pool chemicals. Without having problems with water quality.

I would not recommend such a thing for a public pool. If countless visitors use this pool, the risk would be too great. I am sure the regulatory authorities would not agree.

However, it is preferable to use these rings even for public swimming pools in order to reduce maintenance costs for protecting pipes or walls of the swimming pool. By doing this, you will need a lot less chlorine to disinfect the water than before while maintaining the same quality of water.

In the next blog post, we will talk about how lime deposits form on your pool tiles and several ways you can get rid of the problem.


Calcium Gone

Call us when you want the calcium gonecalcium removal calcium killer

Tap Here to Call and speak to the expert in calcium.

pool tile cleaning,cleaning pool tile,Pool tile cleaner,swimming pool tile cleaning,cleaning calcium on pool tile,cleaning swimming pool tile,swimming pool calcium tile cleaning,cleaning white stuff on pool tile,white stuff on my pool tiles,calcium pool tile cleaning,cleaning calcium on my swimming pool tile,white stuff on my pool tiles,how to clean off calcium on my pool,calcium cleaning

Quick Contact Form

Your Name (required)

Your Phone # (required)

Your Email (required)

Subject

Your Message

Enter In these letters / numberscaptcha
In to this box to prove your real...

Swimming Pool Tile Cleaning | Calcium Cleaning | Cleaning Pool Tile Services - Just One Call To The Pool Tile Cleaner Pro Get's The White Stuff GONE!

Specialties Aquatic Tile Cleaning GPS Directions