Monthly Archives: November 2020

  • 0

What Should my Pool’s pH Level Be?

Tags : 

Maintaining your pool’s pH level—one of the most important measures—doesn’t have to be an extreme sport. Your swimming pool’s pH levels help keep the water quality of your pool at the right level for humans.

If you keep the pH at the right levels, in addition to enjoying healthy water you can keep the water in your pool clean and crystal clear.

The pH is the measure of the acidity or basicity of a solution, in this case, the water in our pool. The optimal values recommended by the experts range between 7.2 and 7.6, so we must pay attention and be alert if the average obtained falls outside the indicated range.

If the pH decreases below 7.2 we have acidic water. If this happens, it will cause irritation to the skin, eyes and mucous membranes, in addition to generating corrosion problems in the pool materials (metal ladders, pumps, valves, and filters).

Person Feet Dipping on Pool

If on the contrary, the pH value rises above 7.6, the water in our pool becomes basic or alkaline. As was the case with acidic water, alkaline water, in addition to previous symptoms such as skin and eye irritation, would also cause dryness in our skin. Due to the basicity of the water, traces of calcium compounds are generated on the surface of the pool, and consequently, the water is seen in a more turbid and less crystalline form, also reducing the desired sterilizing and disinfectant effect with the addition of chlorine, consequently generating algae problems.

Experts recommend that periodic checks be made to maintain good water quality, as well as to maintain pH levels at levels suitable for bathing. It is advisable to perform a pH measurement at least once a week, acting as explained below if the pH parameters are beyond the ranges indicated.

Importance of the pH of the Pool, Why Does it Rise and Fall?

The ideal pH range for our pool water to be healthy ranges from 7.2 to 7.6, but sometimes when we take the measurement with our pH meter we are surprised that this value has risen or fallen.

The reasons why the pool’s pH rises (or falls) are mixed and varied, but commonly  the pH of the pools usually gives high values, that is, basic ph’s:

  1. A determining factor has to do with the amount of water in the pool. Weather factors such as wind and sun make the water evaporate over time, and therefore the pH increases as the amount of water decreases. On the other hand, ultraviolet radiation from the sun increases the dissolution rate of chlorine in water, generating a gradual increase in pH values.
  2. A second factor is the bathers themselves. The sunscreens, moisturizers, body lotions, hair cells, dead skin, and even electrolytes from sweat make both chlorine and water acidity to be modified. Generally, bathers also cause pH levels to rise.
  3. Finally, the way to add chlorine to the pool can also change the pH values. The chlorine added in liquid form is nothing more than sodium hypochlorite, that is, bleach. This salt in the form of a solution is a highly alkaline or basic substance and therefore its addition generates significant pH increases. Chlorine added in tablets, on the other hand, includes trichloroisocyanuric acid that acidifies the water, thus reducing the pH of the water. A third modality is a form of granulated chlorine, which is characterized by having a pH close to neutrality (6.7) and the pH levels will be close to 7 therefore.

If for some reason you add more chlorine than you should, you should know how to lower chlorine pool. For this, there are different techniques we will discuss later.

How to keep the pH at optimal values?

Maintaining the pH value at optimal values ​​is of the utmost importance. Failure to do so creates a danger to the health of the users of the pool. The recommended pH values ​​range between 7.2 and 7.6, so a periodic pH measurement is advisable. Broadly speaking, when the pH becomes acidic and falls below 7.2, acidic water can irritate the eyes and skin (it is important to know how to increase the pool). If the pH rises from 7.6 becoming the basic water, there is a loss of effectiveness of the dissolved chlorine and therefore a decrease of the disinfectant power that is pursued. 

The pH meter or pH meter is the scientific instrument specially designed for these tasks. In the market, we have different types of meters, such as digital, pocket, and even the test strips, which although they give us semiquantitative values, we must not neglect their effectiveness, simplicity, and ease of use.

Expert recommendations tell us that pH measurements must be made periodically or after special episodes, such as a storm. The rain and the pollution that drags in its precipitation tend to acidify the water and raise the pH. It is also advisable to measure it after the use of the pool by a large number of bathers since the use of lotions, sun creams, and the bathers’ own sweat can cause the pH to rise and become more basic.


  • 0

How to Clean Your Pool and Tiles with Harmless Products

Tags : 

A dirty swimming pool can ruin the purpose of your pool. It is very difficult to relax and swim in a pool with stained and dirty tiles. It’s an eyesore and will make you feel dirty after swimming in the pool like you just stepped out of floodwaters.

It is not supposed to be that way. So in this article, we will show you how you can easily clean your pool tiles. You can do this on a calm Saturday morning and be done in a couple of hours.

So, get your rubber gloves ready. This may impress you better than you imagine it could.

Cleaning Your Pool with Everyday Household Items

For cleaning your tile joints, mix 1/3 liter of dishwashing liquid in a liter of hot water. Rub vigorously and rinse.

Besides commercially available household cleaning products, there are several natural and affordable solutions to whiten your tile joints.

Bathroom, kitchen… Over time, grease residues, mold, and yellow stains can appear on the tile joints. To overcome this dirt and restore its shine to your joints without getting tired, there are natural tips to test without hesitation.

How to clean the tile joints?

Before cleaning the joints, first, wash the tiles around them. If they are dirty, the seals will be too. Then, to clean the tile joints you can recycle an old toothbrush which you will use as a joint brush. On the product side, you have many possibilities: white vinegar works miracles in the house, claystone, and Meudon white are very effective at cleaning joints. Black soap cleans thoroughly.

To use these natural products, soak a sponge of warm water and do not hesitate to scrub the dirtiest parts well.

What products should I avoid when cleaning tile joints?

To properly clean the tile joints, avoid using a steam cleaner repeatedly. This could take off the tiles. In the same way, forget about bleach and acid, these products toxic to health and the environment, wear out the seals, and can damage the seal. Water could then infiltrate and cause the tiles to peel off.

Which product should you use to whiten tile joints?

Weather and humidity damage the tile joints, which will then be stained and blackened. This is quite unsightly and gives the impression that the tiles are dirty and old. To whiten the joints, a miracle and natural product can be used: baking soda! Add with white vinegar and washing up liquid, the baking soda will allow you to whiten the tile joints naturally.

Let this mixture sit for a few minutes on the joints before rubbing it with a brush. They will then be white as on the first day!

Calcium Cleaning Specialties Aquatic Tile Cleaning

Using Baking Soda in Your Pool

Do you know what harsh chemicals do to your skin and pool?

Chlorine and other chemicals have adverse effects on your skin. Continuous exposure to these chemicals leads to a lot of serious health issues. You could get asthma, cancer, or other respiratory issues.

These chemicals could react with other chemicals in the water and the air around your pool and increase the chances of you getting affected.

Fortunately, there is a natural tip for cleaning the pool liner without chemicals, even if the pool is full. The simple and effective thing is to clean it with baking soda.

Steps

1. Take baking soda

2. Sprinkle it on a sponge

3. Put yourself in the swimsuit

4. Rub the dirty mark with the sponge

5. Put baking soda back on the sponge

6. Continue around the pool.

And now, your pool is now perfectly clean without using chemicals

Easy, fast, and efficient, right?

Not to mention that it is 100% natural. Products sold commercially are so harmful that it is forbidden to bathe for 12 to 24 hours after use! It is scary, right?

With baking soda, you risk absolutely nothing. You can enjoy your pool immediately and cool off immediately. Even a baby can bathe without risk for its fragile skin.

Why does it work?

Baking soda is a great product that has incredible cleaning, stain removing, and antiseptic properties. It eliminates the dirt that forms on the waterline easily. Thanks to its grainy appearance, bicarbonate also has abrasive properties to gently loosen dirt without damaging the liner.

In addition, this trick also works very well for maintaining the pool throughout the season. Don’t worry, the bicarbonate is safe for the cover, the paint, or the walls of the pool, whether it is a shell or cement pool, whether in-ground or above ground. And you can even clean the children’s plastic pool, a freestanding pool or a tubular pool this way.

Ceramic tile with heavy build up

Bonus tip

Baking soda has another property. It also has a regulating action on the pH of water.

It increases the pH of the pool water when it is too acidic (between 0 and 6) and decreases it if it is too basic (between 8 and 14).

This allows you to regulate the water and obtain a neutral pH, around 7.
To test the pH of the pool water, just use test strips. It’s super easy! Soak it in water and you will immediately see the result.

If the result is not good, pour a full cup of baking soda into the water. Then leave on overnight. Test the pH of the pool water again with a new strip. If the result is still not good, start putting bicarbonate in the water again and wait overnight.

The amount of bicarbonate needed will depend on the volume of water, but also on the pH of the water before treatment.

Your turn…

Have you tested this natural trick for easy pool maintenance? Let us know in the comments if it worked for you. We can’t wait to read yours!

These are simple tips you can start implementing today and see impressive results on your pool tiles. If you don’t have the time to do this yourself and will love a professional to step in with industry-standard materials to give you a perfect swimming pool tile cleaning job, contact us.

We will love to help you bring your pool back to its former glory, looking good as new.


  • 0

Everything You Should Know About Cleaning Calcium Deposits in Your Pool

Tags : 

You can spot calcium deposits from the line and spots they leave on the waterline of your pool. These calcium deposits are extremely difficult to clean. But in this article, we’ll give you some pointers to get rid of them.

There are some reasons why you may start to notice these spots around the waterline.

The first reason is hard water, which can leave a calcium residue over time. If you live in an area of the country with hard water, it is likely that you have already noticed this accumulation in your faucets, sinks, and even bathtubs.

The second reason is the heat. The high summer temperatures cause the water in the pool to evaporate more and also raise the water temperature.

When combined with the third reason, the chemical composition of your pool, these conditions can cause calcium deposits.

Specifically, if your pool has a high pH, high alkalinity and hotter water, the calcium scale will begin to form.

Lime stains in pool

The reason why this situation occurs so often in the water line is due to evaporation. These calcium crystals can appear as nodules that dot the metal and plaster, or they can become scabby deposits that live in the corners of the pool.

Technically, these are two different things. Calcium carbonate, which tends to manifest as a scaly substance on the surface of the pool, and calcium silicate, which is grayish-white and harder. Either way, they are not exactly aesthetically pleasing.

What does lime do to your pool?

Obstructed filters

Pool filters are designed to treat water or other types of waste typical of the pool: insects, leaves, etc. But they are not designed for hard calcium deposits.

As more and more hardened calcium passes through the filter, the system will slow down and not work as well due to clogging.

Damage to the Plaster

If left untreated, calcium deposits will continue to grow and spread to other areas of the pool, including, in the background. This can result in the creation of clumps in the plaster that you will have to eliminate if you do not want the finish to be damaged.

Irritation of eyes and skin

If people swim in a pool with excess calcium, which is causing deposits, there is a great chance that there will be skin and eye irritation.

Calcium deposits and scaling are unattractive, make swimming pools uncomfortable for swimming and can cause serious and costly long-term damage.

Steps to Remove Lime

Limescale deposits can form along the waterline of your pool. This is usually caused by a high pH, high alkalinity or a high concentration of calcium. Constant temperature changes along with rapid evaporation will cause the deposits to settle along the side of the pool wall. If the deposits are not removed soon, it can cause permanent damage to the surface of the pool.

Cleaning with vinegar

Baking soda, borax, dish soap, toothpaste, and vinegar can be used in much the same way to clean calcium deposits, so you can use most of the information related to the vinegar and apply it also to cleaning agents.

What you need for cleaning with vinegar:

  • A cleaning brush. With soft bristles, not metallic.
  • A bottle of spray.
  • Vinegar, a 5% solution.

Once you have these items, you can start cleaning.

  1. The first step is to stop all use of the pool until a water test can be performed. If the test reveals that the levels are within range, you can use a stain remover to remove deposits from the waterline. If the pH, alkalinity or calcium levels are too high, they should be reduced before using a scale and scale cleaner.
  2. It is recommended to start first by lowering the hardness of the water. The hardness can only be lowered by partially draining and then filling the pool. Your pool needs a hardness level of 200 ppm to 400 ppm. A level of hardness above 400 ppm can lead to scale formation on the surface of the pool and equipment and can also cause cloudy water.
  3. Once the pool has drained, and filled again, check that the hardness is within range. If it is not, you must repeat step 2 until you normalize the hardness. Only in that case can you adjust the alkalinity. You should retest before doing so because the alkalinity should be lower than before. To reduce alkalinity, you can use dry acid or muriatic acid. The necessary amount of any of the chemical products will vary according to the size and volume of the pool and the reading of alkalinity.
  4. Once the alkalinity is within the range, the pH can be adjusted. For this, a negative pH is used, in case of a high pH. Once the pH is balanced, we can move on to the final step.
  5. The final step will be to use the vinegar. Before adding the product, (following the package instructions), make sure you have a pool brush handy to brush the walls as needed. There are no special tricks. You can put the vinegar in the bottle and spray the solution on the calcium deposits or simply pour it from your own bottle, then use the brush to scrub.

These types of cleaners tend to work quite well if you detect and solve the problem from the beginning, and of course, you should use them fairly regularly to avoid accumulation.

If you do all these steps, and still have lime deposits that are difficult to remove, try the following.

Cleaning with muriatic acid

With the vinegar and the other mild cleansers that we have already mentioned, you can enter the pool while you are cleaning. With muriatic acid, however, this is not recommended.

Muriatic acid is more powerful and more dangerous when handling. You can find this chemical in a home improvement store or pool supply store.

What you need for cleaning with muriatic acid:

  • Muriatic acid container.
  • Safety glasses.
  • Rubber gloves.
  • Respirator.
  • Plastic cube.
  • Measuring cup of plastic.
  • Plastic spoon
  • Plastic spray bottle.
  • Marker.
  • Non-abrasive scourer

This list of materials is enough for you to realize that this goes beyond the maintenance of the pool for beginners. We want to remind you that muriatic acid is dangerous.

  1. Put on goggles, gloves and the respirator. Then head outside with all your ingredients to start mixing. Absolutely do not attempt to mix in a closed area.
  2. Fill your bucket with four liters of water. Pour 230 grams of muriatic acid with the measuring cup slowly into the water. Always pour the acid in the water instead of the other way round, as the acid is more likely to splash. Another thing to keep in mind is that you should pour slowly since this mixture produces heat.
  3. With the plastic spoon mix the water and the acid. Again, do it slowly, because you do not want it to boil.
  4. Carefully fill the plastic bottle with a mixture of water and acid.
  5. Use the marker to label the measuring cup, spoon and spray bottle with “Muriatic acid”. Do not try to use the chemical for anything else. If you are worried that this may happen, leave the bottle aside for proper disposal.
  6. You should always stay out of the pool, use the spray bottle to spray the waterline of the pool and rub with the non-abrasive scouring pad.

Get in touch with your local pool supply company or with the municipality to learn how to get rid of any unused muriatic acid. Do not simply discard it or pour it down the drain.

Because muriatic acid is much stronger than vinegar or other cleaning products mentioned above, you can eliminate calcium deposits that are much more advanced. That said, with deposits that have been growing and hardening for a long time, sometimes even muriatic acid is not enough.

If that is your situation, you have a remaining option. Pressure washing.

Cleaning with a pressure washer

Cleaning with a pressure washer is something that professional pool cleaners use, called “blasting accounts”. This process uses compressors to “blow up” pearls, sand and other materials (depending on the specific tool used) on your tile at a high speed to basically blow or scrape the calcium deposits.

It works surprisingly well, and it’s fast. And best of all, you are not doing the work yourself. Unfortunately, it can also be expensive, especially if you need to call them to do it regularly.


  • 0

Is Calcium Building Up On the Waterline of Your Pool?

Tags : 

Lime stains in pool

A common issue that every pool owner will encounter at some point down the road would be calcium buildup in the area around the pool. Calcium buildup can cause your pool to look dated and aged. You spend tens and thousands on a new pool why not just keep it that way? We see so many pools in which the owner didn’t control it! But not everyone knows until it happens to them!

The waterline is the usual residue point

The waterline is the most common area for calcium and lime to build up. It’s very important to address it at first sight so it can’t become a big deal because as these build up it causes damage to your pool whether you see it or not. It gets in the pool filters that are designed for soft objects, not hard calcium. See how this can be a potential issue? Another common thing that will happen if it is left untreated for too long is that it will continue to damage the plaster and grow. This will grow anyplace near the pool that is constantly wet. Now that leaves you with 2 problems to fix because the first wasn’t addressed when it should have been!

Is calcium deposits irritating your eyes?

A lot of people enjoy swimming with their eyes open and not with goggles. When it gets to a certain point calcium deposit can start to just appear in the pool. This leaves the swimmers at risk of opening their eyes underwater. Another thing is that it leaves the pool uncomfortable. Leaving particles in the pool and making it uncomfortable for swimmers, causing debris to get into the eyes

Getting rid of calcium deposits

You can very easily take care of this and save yourself some money by grabbing yourself some toothpaste, baking soda, and vinegar. Using knees together and scraping off the calcium deposits can be much help. Another thing you can do is clean it with muriatic acid. This is a lot more powerful and should be handled with extreme caution. You can pick up muriatic acid at just about any pool store. But before you do any of this, contact your local pool store and tell them your situation. See if they can offer any advice on what would best help you in the end.

Let’s help you get rid of calcium deposits

You don’t have to expose yourself to danger and break your back trying to get rid of calcium deposits. These are extremely difficult deposits to clean from your pool waterline. Let’s step in with our specialized tools, equipment, and years of experience to get rid of this problem for you easily.

If you’re ever wondering about how to get your pool tiles cleaned, repaired, or replaced you found the right place. Do you want to bring the old life back to your pool? Or pool makeover, rehab special is what you need! Give us a call today for any questions regarding your pool or the services we offer! Call us at 626-275-8959! Serving all of Covina Ca!


Calcium Gone

Call us when you want the calcium gonecalcium removal calcium killer

Tap Here to Call and speak to the expert in calcium.

pool tile cleaning,cleaning pool tile,Pool tile cleaner,swimming pool tile cleaning,cleaning calcium on pool tile,cleaning swimming pool tile,swimming pool calcium tile cleaning,cleaning white stuff on pool tile,white stuff on my pool tiles,calcium pool tile cleaning,cleaning calcium on my swimming pool tile,white stuff on my pool tiles,how to clean off calcium on my pool,calcium cleaning

Quick Contact Form

    Your Name (required)

    Your Phone # (required)

    Your Email (required)

    Subject

    Your Message

    Enter In these letters / numberscaptcha
    In to this box to prove your real...

    Swimming Pool Tile Cleaning | Calcium Cleaning | Cleaning Pool Tile Services - Just One Call To The Pool Tile Cleaner Pro Get's The White Stuff GONE!

    Specialties Aquatic Tile Cleaning GPS Directions