Monthly Archives: August 2020

  • 0

How to Clean Your Pool and 100% Remove Calcium Deposits

Tags : 

This must be one of the many questions on the mind of a pool owner. And here I will be giving 5 ways on how to remove calcium deposits from your pool! And not only will it look better, it will allow you to enjoy your pool like you once did!

1. Use a calcium releaser

These products makes it easy to remove calcium deposits. While selecting your product, select acid free calcium releasers, as these products are left a long time on your pool tile before scrubbing off, and the acid could destroy your pool finish.

2. Use scaling treatment

If your pool is made of fiber glass, scaling treatment is advised because other methods would scratch the glass since they involve brushing.

3. Use a pumice

This rock is also effective in removing calcium deposits in pools, make sure the surface of both the rock and the pool is wet, and do not scrub too hard in order not to deface your pool.

4. Use white vinegar and a scrub brush

Fill a water bottle spray with half water and half vinegar solution, spray on your pool tile and leave for some minutes before rubbing gently with a scrub brush.

5. Use muriatic acid

This is also known as Hydrochloric acid, this acid has high strength in removing mineral deposits, calcium deposits inclusive. While using it, you should be fully clothed with your google and gloves in order to avoid safety hazards. Make sure not to leave the acid too long because you do not want to destroy the finish of your pool.

6. Hire a professional pool cleaner to help

There are several reasons why you should hire a professional to take care of your pool.

The first and most important reason is to maintain the chemical integrity of your pool water.

Chemically treating a swimming pool can be very frustrating for pool owners, at least if you want to maintain a level of quality!

In fact, this is a big reason why people prefer a professional review of their pool, as it can be confusing for someone who doesn’t know what they are doing.

Most importantly, your swimming pool is a breeding ground for nasty little organisms. Proper chemical treatment can effectively treat water and ensure the health and well-being of your family.

The next big reason for hiring a pool maintenance professional is to properly maintain the pool equipment. Most owners are not good at mechanically and are a little intimidated by the pool equipment.

In addition, there are a large number of moving parts and if anything moved, it could drastically affect the normal operation of your pool and its filtration process.

A pool maintenance professional will not only keep your pool running smoothly, but will also use preventative maintenance techniques to save you time and money.

The last and most important reason to hire professionals is to enjoy your pool! 

Pick up the phone and call 626-275-8959 and get your free estimate! Proudly taking care of Covina CA and all of its pool owners! Feel free to also give us a call with any other questions or concerns regarding your pool!

Bottomline

Calcium deposits in pools can have side effects on people who use the pool, these effects can range from eye irritation to whole body irritation, they are also irritating to look at and would reduce the interest of people in your pool.

When removing these deposits, make sure you are dressed properly to avoid safety hazards and also try as much as possible not to destroy the finish of your pool.



  • 0

How We Can Help You With Your Pool Today

Tags : 

Types of Services We Offer?

Here at the specialty aquatic tile cleaning, we offer a wide range of pool cleaning services! I will first start off by telling you that a clean pool is a lot more enjoyable. When your pool is clean and everything is right, you can expect to swim with your eyes open and not worry!

Pool Tile Cleaning and Replacement

When you get your pool tile repaired or replaced by us, you can expect everything to look as good as new. We can help you if they’re discolored as well!

Pool Makeover Special

Another service that we offer as well would be our pool makeover special. If your pool hasn’t received the care and attention that it requires you can probably start to notice some discoloration going on. How we address this issue is first we have to completely drain the pool, followed by an acid wash to clean the plaster, and then lastly calcium removal on the tiles. But just like any other job, it all depends on the pool size!

Power Washing

The third most popular service that we offer would be power washing. When we power wash you can expect to have your deck completely clear of any old dirt marks. This is usually what people get as well as the pool makeover. These both go together really well, leaving your backyard as you could remember it years ago.

Ceramic tile with heavy build up

Many pool owners know that owning a pool can be difficult at first and very irritating. So why go through all of the problems that arise with pool owners when you could have a trusted company like specialty aquatic tile cleaning take care of it for you!

Here at specialty aquatic tile cleaning, we charge by the linear foot. In some cases very rarely though, it is by the square foot. Our goal is to satisfy our customers and demolish the competition. We offer free estimates to anyone within 35 miles of us. So why are you waiting?

Pick up the phone and call 626-275-8959 and get your free estimate!

Why Should You Work With a Pool Maintenance Professional?

There are several reasons why you should hire a professional to take care of your pool.

The first and most important reason is to maintain the chemical integrity of your pool water.

Chemically treating a swimming pool can be very frustrating for pool owners, at least if you want to maintain a level of quality!

In fact, this is a big reason why people prefer a professional review of their pool, as it can be confusing for someone who doesn’t know what they are doing.

Most importantly, your swimming pool is a breeding ground for nasty little organisms. Proper chemical treatment can effectively treat water and ensure the health and well-being of your family.

The next big reason for hiring a pool maintenance professional is to properly maintain the pool equipment. Most owners are not good at mechanically and are a little intimidated by the pool equipment.

In addition, there are a large number of moving parts and if anything moved, it could drastically affect the normal operation of your pool and its filtration process.

A pool maintenance professional will not only keep your pool running smoothly, but will also use preventative maintenance techniques to save you time and money.

The last and most important reason to hire professionals is to enjoy your pool! 

Pick up the phone and call 626-275-8959 and get your free estimate! Proudly taking care of Covina CA and all of its pool owners! Feel free to also give us a call with any other questions or concerns regarding your pool!


  • 0

The Complete Swimming Pool Maintenance Guide

Tags : 

Owning a swimming pool during the summer months is awesome. At least, as long as it is clean and healthy. To make the pleasure last, you have to maintain it. In this guide, we will show you what you need to do regarding the maintenance of your swimming pool, its water, and the filtration system.

Pool maintenance

Through regular maintenance of your pool, you can prolong its life and the life of its equipment. And when we talk about maintenance, it is mostly the simple routine cleaning and maintenance done regularly that means the most for the swimming pool’s health.

It is advisable to clean the waterline of all impurities at least once a week. A tedious job, and sometimes long depending on the size of the pool, but effective in ensuring the cleanliness of the pool. To do this, you can use a specific product, an anti-lime product or a degreaser, and rub with a sponge.

It is recommended to use a vacuum cleaning broom or a swimming pool robot to clean the bottom of the pool, at least once a week.

You must regularly empty the baskets of the skimmers, otherwise known as surface skimmers, to avoid their clogging and clogging of the walls.

As a general rule, it is advisable to monitor the water level. The surface of the water should be two-thirds of the skimmer. Underneath, there is a risk of air intake and damage to the pump. Above, the cleaning of the water turns out to be imperfect.

Water Maintenance

Cleaning your pool also means maintaining the water. It must be clear, balanced, disinfected, and disinfectant.

You can very simply clean the surface of the water using a dip net to remove large debris. To be repeated at least once a week.

The quality of the water also depends on the use of chlorinated or anti-algae products. To do this, you have six options: chlorine, bromine, active oxygen, PHMB, ultraviolet, and salt electrolysis.

It is advisable to regularly analyze the pool water, and more precisely the level of pH and disinfectant present in the water. Then you must correct the water accordingly, either by adding a cleaning product or by reducing its quantity.

Note: a pH below 7 can be harmful to the skin.

Maintenance of the Filtration System

The quality of the water depends on the filtration system. To check the filtration system, you will need to check the good simmering of the water at the outlet of the delivery nozzles: a sign of good water circulation in the filtration system.

Check the clogging of the filter. To clean a cartridge filter, simply remove the cartridge and rinse it with a water jet. To clean the other filters, backwash systems exist.

Regular Maintenance is a Prerequisite for Quality Swimming Pool Water

To have quality bathing water and not to resort to shock treatments, it is preferable to maintain your swimming pool regularly.

The pool water should be pure, clear, and the pH should be neutral; slightly basic water is however accepted – the ideal rate of 7.4. To avoid any imbalance of your water source of green water, cloudy water, and the appearance of water lines, the maintenance of swimming pool water is mandatory.

This maintenance concerns the use of a swimming pool disinfectant, the occasional application of products to maintain the pH level stable as well as the filtration of the water. Inflatable pools, tubular pools, above-ground pools, and in-ground pools are subject to regular and periodic maintenance: all pool water must be maintained and analyzed regularly using water control kits.

The analysis of swimming pool water measures the level of disinfectant, the pH, the stabilizer, and the alkalinity. As a reminder, water with a pH (potential of hydrogen) greater than 7 is said to be basic and acidic if it is less than 7.

The Risks and Consequences of an Unmaintained Swimming Pool

It is imperative to clean your swimming pool for several reasons:

  • Benefit from clear water and preserve its quality from any external pollution;
  • Guard against any premature wear of coatings such as liner, concrete or tiles;
  • Maintain water that is always clean, healthy, and suitable for swimming.

Cleaning your pool after winter is also essential. Above ground pool, in-ground pool, wood, or plastic, all need cleaning.

A swimming pool enclosure, a winter cover, or a pool cover limits the cleaning of the pool, however, the pool and the liner are not immune to the appearance of a water line and suicidal insects!

Protecting your swimming pool from the elements is one thing, believing that this eliminates the need for cleaning with a high-pressure washer is a little too optimistic!

The 5 Steps for Cleaning an Above-ground or in-ground Swimming Pool

You need different equipment to ensure periodic and daily cleaning of your swimming pool. Cleaning your pool naturally is recommended, and cleaning your pool with acid is strongly discouraged. Hydrochloric acid is not to be used in a swimming pool, even in skimmers!

Here is How to Clean an Above-ground or In-ground Pool in 5 Steps:

  • Clean the surface pool water of any external pollution using a dip net.
  • Suck up dirt from the bottom of the pool with a vacuum broom or with an automatic or semi-automatic pool robot, more practical because it is autonomous.
  • Use a water line brush, a kind of sponge to gently rub the waterline, formed by residues marking the limit of water on the liner (be careful not to damage it). The use of special coating/liner cleaning products makes the task easier. The walls and the bottom can also be cleaned with a brush.
  • Remove the residues present and pass a sponge on the skimmers, filters which are also to be cleaned. The skimmers clean the surface of the water by skimming them, the impurities sucked up are then sent to the pump which, after filtration, pushes the water back into the basin.
  • Wash cover, curtain, tarpaulin, pool enclosure, and coping; the use of a high-pressure cleaner facilitates the removal of dirt. The use of a low abrasive product is necessary to preserve the equipment.

Pool maintenance must be regular to be effective. If you are not there or do not have the energy necessary to maintain your pool, contact a pool specialist near you. Most of them provide maintenance contracts. And when your pool tiles and wall get overgrown with lime deposits and calcium deposits, call the Calcium killers to help you get rid of those ugly white deposits on your pool tiles.


  • 0

How to Use Well Water for Swimming Pools: Trick to Purify It

Tags : 

When you want to install a salt chlorinator in a pool with well water, we recommend that you empty it and fill it with water from the water supply grid.

What are the drawbacks of well water

The reason is that lime and other minerals often cause problems in the chlorinator electrode.

During electrolysis, lime and other elements precipitate and end up being embedded in the plates of the chlorinator cell.

The performance of the electrode decreases, because the plates are electrically isolated, due to the layer of lime, which acts as an insulator.
To clean the electrode plates, the electrode must be immersed in acid, which also attacks metal.

After many washes, the electrode ends up having serious corrosion problems.

In addition, there are other salts and metals present in well water that cause other problems, both due to the sediments they cause and due to the electrochemical effects that are produced.

Lime stains in the pool

If you have ever noticed, you will have seen that there is a white line on the walls, at the height of the surface. This is caused by lime deposits.

In pools with well water, these lime deposits form in a short time, and if they are not removed, the layer becomes thicker and difficult to clean.
Another problem is the roughness that is noticeable on the walls, when passing the hand the touch is rough.

Over time, this texture favors the accumulation of dirt and makes cleaning more difficult.

In addition, if you apply acid to dilute the lime, you are also diluting the cement in the joints, damaging the lining, until you have to empty the pool to repair it.

How to use well water for the pool

On many occasions, especially in pools installed in rural areas, there is no access to running water, so there is no choice but to use well water to fill the pool.

Well, I have a trick to remove lime from the pool with well water.

Well water treatment

This trick is not for everyone. It is not difficult to apply, but you have to be careful to follow the steps correctly.

If the pool is already affected by the remains of lime, you should lower the pH as much as possible, adding a lot of acid, or liquid pH-.

With a pH lower than 6, the lime will start to thin, but so will the cement joints.

It is VERY IMPORTANT that no one takes a bath during the process. The acidity of the water will be very aggressive for people.

After a few days in this state, empty the pool completely, clean the surfaces well with acid (better to use a specific liquid or pH reducer based on sulfuric acid, because hydrochloric acid or sulfonate emits a lot of vapors).
Finally, you will have to re-grout (apply Borada or seal with cement) all the joints.

As you can see, it is slow and hard work, and it is better to do it out of season, to avoid the effects of heat on the empty pool.

With the pool empty, the next step is filling (you probably already guessed that).

Start filling it by adding shock bleach.

The well water contains a lot of organic matter, is very “alive”, and then the plant matter, such as algae, begin to react to the light of the sun. Water can go bad in a matter of hours. Sometimes the same water is already green. Don’t worry about adding more chlorine than necessary, while no one takes a bath.

How to purify well water

Now comes the secret.

Add flocculant to the water. Yes, it’s that easy, but wait, this is just the beginning.

The flocculant causes all elements other than water to stick together, forming solid “flakes” (flocs) that settle to the bottom of the pool or remain stuck in the sand filter.

Be very careful not to overdo the dose of flocculant, because the sand can stick, and you will have to replace it.

calcium removal calcium killer

You will have to do sand washes every few hours so that the sediment is expelled.

These remains will include lime, algae, metals, and other elements.
The water will be practically pure. You will also have to help by sweeping the bottom so that the dirt does not stay there.

You can increase the effectiveness by adding a layer of diatomaceous earth, or diatomaceous sand over the filter sand, to retain a greater amount of debris.

Anyway, think that diatomite is difficult to find and somewhat expensive, so it is not necessary to use it unless you want to do a cleaning worthy of an operating room.

Most of it will go down the drain when doing a sand wash, so this is disposable.

The process time will depend on the type of water you are treating, so you will have to experiment and observe.

You can also repeat the process after a few days. However, it is better to do it before adding salt, in salt chlorination systems.

Prevent stains on the pool tile

I am not a fan of adding chemicals to the water, so once the pool is filled with purified water, I would try to avoid adding other products. For that, it is important that the chlorine level and the pH are perfect. There is nothing else to do.

When adding water, after washing, or simply to compensate for evaporation, we must bear in mind that we have also added lime, so we can repeat the process from time to time.

It should be done as a shock treatment. We do not recommend using maintenance flocculant, because it is still a chemical product which in large quantities is unhealthy, as you can see in this post.

If you’ve done enough washes to remove most of the lime, you’ll see that the water is crystal clear and the walls shiny.

Run your hand over the walls periodically, to make sure that the touch is smooth (but not slippery, which would be a sign of algae formation).
If you notice that they become rough, you should lower the pH a little and do another anti-limescale treatment.

Try to have these treatments done on the days that the pool is not used, to avoid exposure to bathers, especially with low pH.

Use of anti-scale products for swimming pools

There are products that keep lime in suspension, so they don’t really remove it, they just keep it from sticking to the walls.

This is an ineffective solution because it forces you to continually add chemical products, with the risks that they entail, and it also does not completely prevent lime from becoming embedded in the chlorinator electrodes.

The flocculant and sand wash trick works better, because you’re actually getting a lot of the lime out of the pool.

Other options to reduce pool limescale

In facilities with intensive use, such as spas and hotels, a tank can be installed to flocculate the water before adding it to the pool. In addition, filters or osmosis systems can be installed, which can purify the water, leaving it almost as if it were distilled.

These systems are not justified in domestic swimming pools, because with good flocculation the water quality is already very good.


  • 0

How to easily clean my above-ground pool: the ultimate guide!

Tags : 

To have unparalleled bathing comfort throughout this summer, your above ground pool needs to be cleaned regularly. Simple actions, a little equipment, a little time and you make sure to keep the water clean and the equipment efficient.

Treatment and filtration products help clean water from impurities and keep it clean. However, dirt is also deposited in the bottom, on the walls and in the equipment, which is why it is necessary to clean your swimming pool regularly.

Step by step cleaning

1. Remove debris from the surface of the water

Using a landing net, remove any debris floating on the surface of the water, blown by the wind: insects, plants and others.

Redo this as soon as debris is present on the pool water.

2. Empty the baskets

If your pool contains a skimmer, empty the basket which contains large debris such as insects and plants.

Check the skimmer regularly and empty the basket if it contains debris.

The filtration of your pool is initiated by a pump. It has a transparent cover in order to control the pre-filter basket which may contain debris passed through the skimmer. As well as the skimmer basket, empty the pump basket when it is not in operation.

Check the pump regularly and empty the basket if it contains debris.

Be sure to increase the frequency of checks during the high season.

3. Vacuum the bottom and sides

Once a week, clean the bottom and sides. This can be done using a manual or automatic vacuum cleaner, or an automatic robot, both connected to the filtration. Be careful to have a pump powerful enough to connect a vacuum cleaner or a robot.

Clean the debris from the bottom of the pool once a week using a vacuum cleaner or robot. If, before the season, the pool is used less, reduce the frequency of cleaning.

4. Clean the water line

Dirt clings and the water line becomes greasy, which is why it is important to clean it once a week, before or after vacuuming the basin. The water line is cleaned manually using special sponges. Note that some automatic robots make the waterline.

5. Wash the filter

  • Sand filter

Wash the sand from the sand filter once a month when the pool is not used a lot to once a week in high season. To know when to wash the filter, look on the manometer (if your filter has one), if the needle is in the red, you must backwash the filter.

Regularly check the pressure gauge and backwash when the filter is not in the filtration phase.

  • Cartridge filter

In high season, the filter cartridge must be changed every 2 to 3 weeks. For regular filter maintenance, clean the filter cartridge with clean water twice a week.

Follow this advice and you will enjoy your above ground pool even better this summer. Plus, it is a healthy way to maintain your pool cleanliness.


Calcium Gone

Call us when you want the calcium gonecalcium removal calcium killer

Tap Here to Call and speak to the expert in calcium.

pool tile cleaning,cleaning pool tile,Pool tile cleaner,swimming pool tile cleaning,cleaning calcium on pool tile,cleaning swimming pool tile,swimming pool calcium tile cleaning,cleaning white stuff on pool tile,white stuff on my pool tiles,calcium pool tile cleaning,cleaning calcium on my swimming pool tile,white stuff on my pool tiles,how to clean off calcium on my pool,calcium cleaning

Quick Contact Form

Your Name (required)

Your Phone # (required)

Your Email (required)

Subject

Your Message

Enter In these letters / numberscaptcha
In to this box to prove your real...

Swimming Pool Tile Cleaning | Calcium Cleaning | Cleaning Pool Tile Services - Just One Call To The Pool Tile Cleaner Pro Get's The White Stuff GONE!

Specialties Aquatic Tile Cleaning GPS Directions