Monthly Archives: August 2019

  • 0

Why Specialty Aquatic Tile Cleaning Is Your Best Choice!

Tags : 

Types of Services We Offer?

Here at the specialty aquatic tile cleaning, we offer a wide range of pool cleaning services! I will first start off by telling you that a clean pool is a lot more enjoyable. When your pool is clean and everything is right you can expect to swim with your eyes open and not worry!

When you get your pool tile repaired or replaced by us you can expect everything to look as good as new. We can help you if they’re discolored as well!

Another service that we offer as well would be our pool makeover special. If your pool hasn’t received the care and attention that it requires you can probably start to notice some discoloration going on. How we address this issue is first we have to completely drain the pool, followed by an acid wash to clean the plaster, and then lastly calcium removal on the tiles. But just like any other job, it all depends on the pool size!

The third most popular service that we offer would be power washing. When we power wash you can expect to have your deck completely clear of any old dirt marks. This is usually what people get as well as the pool makeover. These both go together really well, leaving your backyard as you could remember it years ago.

Ceramic tile with heavy build up

Many pool owners know that owning a pool can be difficult at first and very irritating. So why go through all of the problems that arise with pool owners when you could have a trusted company like specialty aquatic tile cleaning take care of it for you!

Here at specialty aquatic tile cleaning, we charge by the linear foot. In some cases very rarely though, it is by the square foot. Our goal is to satisfy our customers and demolish the competition. We offer free estimates to anyone within 35 miles of us. So why are you waiting? Pick up the phone and call 626-275-8959 and get your free estimate! Proudly taking care of Covina CA and all of its pool owners! Feel free to also give us a call with any other questions or concerns regarding your pool!


  • 0

How To Have Your Pool Area Looking New Again!

Lime stains in pool

A common issue that every pool owner will encounter at some point down the road would be calcium buildup in the area around the pool. Calcium buildup can cause your pool to look dated and aged. You spend tens and thousands on a new pool why not just keep it that way? We see so many pools in which the owner didn’t control it! But not everyone knows until it happens to them!

The water line!

The waterline is the most common area for calcium and lime to build up. It’s very important to address it at first sight so it can’t become a big deal because as these build up it causes damage to your pool whether you see it or not. It gets in the pool filters that are designed for soft objects, not hard calcium. See how this can be a potential issue? Another common thing that will happen if it is left untreated for too long is that it will continue to damage the plaster and grow. This will grow anyplace near the pool that is constantly wet. Now that leaves you with 2 problems to fix because the first wasn’t addressed when it should have been!

Causing Irritation To Your Eyes?

A lot of people enjoy swimming with their eyes open and not with goggles. When it gets to a certain point calcium deposit can start to just appear in the pool. This leaves the swimmers at risk of opening their eyes underwater. Another thing is that it leaves the pool uncomfortable. Leaving particles in the pool and making it uncomfortable for swimmers, causing debris to get into the eyes

Cleaning?

You can very easily take care of this and save yourself some money by grabbing yourself some toothpaste, baking soda, and vinegar. Using knees together and scraping off the calcium deposits can be much help. Another thing you can do is clean it with muriatic acid. This is a lot more powerful and should be handled with extreme caution. You can pick up muriatic acid at just about any pool store. But before you do any of this contact your local pool store and tell them your situation. See if they can offer any advice on what would best help you in the end.

Choose us!

If you’re ever wondering your pool tiles cleaned, repaired, or replaced you found the right place. Do you want to bring the old life back to your pool? Or pool makeover, rehab special is what you need! Give us a call today for any questions regarding your pool or the services we offer! Call us 626-275-8959! Serving all of Covina Ca!


  • 0

What are the Best pH Levels for Your Pool?

Tags : 

What are the Ideal pH Levels for Your Pool?

The pH is one of the most important measures and parameters to maintain the water quality of your pool. If you keep the pH at the right levels, in addition to enjoying healthy water you can keep the water in your pool clean and crystal clear.

The pH is the measure of the acidity or basicity of a solution, in this case, the water in our pool. The optimal values recommended by the experts range between 7.2 and 7.6, so we must pay attention and be alert if the average obtained falls outside the indicated range.

If the pH decreases below 7.2 we have acidic water. If this happens, it will cause irritation to the skin, eyes and mucous membranes, in addition to generating corrosion problems in the pool materials (metal ladders, pumps, valves, and filters).

Person Feet Dipping on Pool

If on the contrary, the pH value rises above 7.6, the water in our pool becomes basic or alkaline. As was the case with acidic water, alkaline water, in addition to previous symptoms such as skin and eye irritation, would also cause dryness in our skin. Due to the basicity of the water, traces of calcium compounds are generated on the surface of the pool, and consequently, the water is seen in a more turbid and less crystalline form, also reducing the desired sterilizing and disinfectant effect with the addition of chlorine, consequently generating algae problems.

Experts recommend that periodic checks be made to maintain good water quality, as well as to maintain pH levels at levels suitable for bathing. It is advisable to perform a pH measurement at least once a week, acting as explained below if the pH parameters are beyond the ranges indicated.

Importance of the pH of the Pool, Why Does it Rise and Fall?

The ideal pH range for our pool water to be healthy ranges from 7.2 to 7.6, but sometimes when we take the measurement with our pH meter we are surprised that this value has risen or fallen.

The reasons why the pool’s ph rises (or falls) are mixed and varied, but commonly  the pH of the pools usually gives high values, that is, basic ph’s:

  1. A determining factor has to do with the amount of water in the pool. Weather factors such as wind and sun make the water evaporate over time and therefore the pH increases as the amount of water decreases. On the other hand, ultraviolet radiation from the sun increases the dissolution rate of chlorine in water, generating a gradual increase in pH values.
  2. A second factor is the bathers themselves. The sunscreens, moisturizers, body lotions, hair cells, dead skin, and even electrolytes from sweat make both chlorine and water acidity to be modified. Generally, bathers also cause pH levels to rise.
  3. Finally, the way to add chlorine to the pool can also change the pH values. The chlorine added in liquid form is nothing more than sodium hypochlorite, that is, bleach. This salt in the form of a solution is a highly alkaline or basic substance and therefore its addition generates significant pH increases. Chlorine added in tablets, on the other hand, includes trichloroisocyanuric acid that acidifies the water, thus reducing the pH of the water. A third modality is a form of granulated chlorine, which is characterized by having a pH close to neutrality (6.7) and the pH levels will be close to 7 therefore.

If for some reason you add more chlorine than you should, you should know how to lower chlorine pool. For this, there are different techniques we will discuss later.

How to keep the pH at optimal values?

Maintaining the pH value at optimal values ​​is of the utmost importance. Failure to do so creates a danger to the health of the users of the pool. The recommended pH values ​​range between 7.2 and 7.6, so a periodic pH measurement is advisable. Broadly speaking, when the pH becomes acidic and falls below 7.2, acidic water can irritate the eyes and skin (it is important to know how to increase the pool). If the pH rises from 7.6 becoming the basic water, there is a loss of effectiveness of the dissolved chlorine and therefore a decrease of the disinfectant power that is pursued. 

The pH meter or pH meter is the scientific instrument specially designed for these tasks. In the market, we have different types of meters, such as digital, pocket, and even the test strips, which although they give us semiquantitative values, we must not neglect their effectiveness, simplicity, and ease of use.

Expert recommendations tell us that pH measurements must be made periodically or after special episodes, such as a storm. The rain and the pollution that drags in its precipitation tends to acidify the water and raise the pH. It is also advisable to measure it after the use of the pool by a large number of bathers since the use of lotions, sun creams, and the bathers’ own sweat can cause the pH to rise and become more basic.


  • 0

How to Avoid White/Limestone Deposit on Your Pool?

Tags : 

What is White deposit?

The white deposit is a deposit of limestone that can agglomerate on the walls and the bottom of your pool. 

What is limestone?

It is the result of a combination of calcium carbonate and magnesium carbonate which consequently forms a high TH (hardness of water).

The hardness of the water depends on your geographical region. It is the result of minerals in the soil that are dissolved during the passage of water.

 

Ceramic tile with heavy build up

What problems are caused by limestone?

In addition to the aesthetics of your pool limestone can affect the filtration. The agglomeration of limestone promotes the encrustation of impurities and the development of algae. In addition, too much limestone can block the filtration system. 

How to measure TH?

The unit of measure of TH is the French degree (° F). It can also be measured in ppm.

1 ° F = 10 ppm = 1g / l

The ideal level of TH is between 100 and 250 ppm (10 – 25 ° F). Too low you risk making the water corrosive but a TH too high favors the production of white deposit.

It is very difficult to reduce the TH of the water. However, it is possible to increase it using calcium chloride. 

How to regulate the TH of your pool to avoid white deposit?

With hard water (above 250 ppm): Firstly, a high temperature of your water favors the formation of the deposit. Adjusting the temperature of your pool helps limit limescale deposits. Second, regulate the pH of your pool between 7.2 and 7.4. Finally, if you can, add a sequestering product to slow the limestone deposit.

With freshwater (less than 100 ppm): Use a product to increase the TH to 150 ppm and adjust the pH of your pool.

Learn more: 

Do not confuse pH and tH


Calcium Gone

Call us when you want the calcium gonecalcium removal calcium killer

Tap Here to Call and speak to the expert in calcium.

pool tile cleaning,cleaning pool tile,Pool tile cleaner,swimming pool tile cleaning,cleaning calcium on pool tile,cleaning swimming pool tile,swimming pool calcium tile cleaning,cleaning white stuff on pool tile,white stuff on my pool tiles,calcium pool tile cleaning,cleaning calcium on my swimming pool tile,white stuff on my pool tiles,how to clean off calcium on my pool,calcium cleaning

Quick Contact Form

Your Name (required)

Your Phone # (required)

Your Email (required)

Subject

Your Message

Enter In these letters / numberscaptcha
In to this box to prove your real...

Calcium Gone! Just Call us and kiss your calcium all gone